DSA2LS

Required equipment

• PC with Windows XP Pro SP3 or above
• USB to Mini USB cable
• Pointed tweezers or paper clip
• Firmware including MfgTool

MfgTool preparing

1. Please go our website download DSA2LS-20141210_USER_IMAGEAGE.ZIP and then unzip file.
2. Please click MfgTool2.exe to execute the upgrade program and wait.
   
3. Please connect AC power and use tweezers to shorted jumper hole. (Do not release!)
   
4. When DSA2LS is connected to PC, there is an HID device found by MFGTools.
   
5. Please click Start, the upgrade procedure will be started.
   
6. After the MfgTool shows Jumping to OS image.
   
7. There is a dialog-box will be shown, please click cancel to close it.
   
8. When upgrade process is finished, the status bars will be show green, as the below picture, and then please click stop and turn off DSA2LS and then click Exit
   
9. Image upgrade is finished