Table of Contents
SD11G5
POST issue on Shuttle G5 models - check setting of jumper JP4.
- Most of the time when your system won't post it is because the J4 jumper pins are loose and losing connection to the motherboard. This means, when you turn on your computer it won't show anything on the screen, known as the No-Post issue.
- To fix this, please unplug the power cord first, then open the case and remove jumper J4 from the motherboard and put it back in place upside down.
- Now please restart the computer and the BIOS screen should appear.
G-Series
The maximum size of a card that fits in the G-Series is 206 mm (L) × 98 mm (H) × 16 mm (D). But due to the different layout designs of each model and VGA card, we strongly suggest to check our VGA support list for each model or test before purchasing the VGA card.
How do I set jumper 1 (J1), if there is a PCI-E VGA card to install?
If you want to use a PCI-E VGA card with SD11G5, you will need to set jumper 1 (J1) to position 1-2.
How do I use the onboard DVI or TV-out?
Please refer to the manual PG31 for the monitor hot-key control list.
ctrl+alt+F1 = D-sub, ctrl+alt+F2 = TV-out and ctrl+alt+F4 = DVI