Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
faq:hardware:bios [2016/08/29 14:30] – Shuttlefaq:hardware:bios [2022/03/07 15:33] (current) – [How do I update the BIOS version in UEFI (UEFI Mode)?] Shuttle
Line 1: Line 1:
-====== BIOS-related FAQs ====== +====== BIOS-related FAQ ====== 
-===== How to find out  the current BIOS version? ===== +===== How do I find my current BIOS version? ===== 
-Start the PC and press the [DEL] or [F2] key to enter the BIOS setup program. The BIOS version is shown in the second line on the main screen. \\ {{:faq:hardware:bios:sz68r5_bios_setup_2.jpg?nolink&500|}}+Please start your PC and press the [DEL] or [F2] key while booting to enter the BIOS setup program. The BIOS version is shown in the second line on the main screen. \\ {{:faq:hardware:bios:sz68r5_bios_setup_2.jpg?nolink&500|}}
  
-===== How to flash BIOS under Windows? ===== +===== UEFI Firmware (versus BIOS) ===== 
-First please download BIOS from our download page, then step by step follow the below instructions. +Just as with many modern PCs, a current Shuttle XPC does away completely with a BIOS but uses a pure UEFI firmware instead. The terms UEFI firmware and BIOS are widely used synonymously, but hardware initialising is now performed by the UEFI. Users might not even notice, but the operating system must be installed and executed in UEFI mode. UEFI creates a GUID Partition Table (GPT) on the system partition instead of a Master Boot Record (MBR). A PC running pure UEFI firmware alone must have a 64-bit operating system installed. 
- +===== How to make a bootable USB flash drive?  ===== 
-<WRAP center round important 60%> +<WRAP important 60%> 
-Please double check that all drivers are installed.+Warning: Please be sure that there are no other USB devices connected to your system during formatting like external hard disks, external optical devices or other USB flash drives. This ensures that you only format the selected USB flash drive.
 </WRAP> </WRAP>
  
-  - Please use zip application to extract BIOS file. +  - Please download the Rufus tool from https://rufus.akeo.ie/ and extract the file. 
-  - Right-click on the BIOS file and select "Run as administrator" option to start flash tool. \\ {{:faq:hardware:bios:bios_update_windows_01.jpg?nolink&500|}} +  - Please run Rufus.exe. 
-  - Please press any key to continue when the below page pops out. \\ {{:faq:hardware:bios:bios_update_windows_02.jpg?nolink&500|}} +  - Select your USB flash drive, and press the Start button, then confirm the following Warning popup.
-  - Wait for the update to complete and don’t close the window. \\ {{:faq:hardware:bios:bios_update_windows_03.jpg?nolink&500|}} +
-  - After flash completed the computer will automatically reboot, please press keyboard "F1" button to continue and press "Del" button to enter BIOS setup menu. \\ {{:faq:hardware:bios:bios_update_windows_04.jpg?nolink&500|}} +
-  - Please press keyboard right arrow button to switch function to the "Save & Exit" page and select "Load Defaults Settings" option, then select "Yes" to load optimized defaults. \\ {{:faq:hardware:bios:bios_update_windows_05.jpg?nolink&500|}} +
-  - Please select "Save Changes and Exit" option, and then select "Yes" to save configuration. \\ {{:faq:hardware:bios:bios_update_windows_06.jpg?nolink&500|}} +
-  - After exiting Bios, the unit will restart. +
-  - Finished.+
  
-===== How to update the BIOS version? ===== +{{:faq:hardware:bios:rufus_tool_01.jpg?nolink&300}} 
-**With DOS operating system (recommended)** + 
-  - Please go to the Shuttle download area and download the appropriate BIOS version. \\ http://global.shuttle.com/download/download+===== How do I update the BIOS version in DOS (Legacy Mode)? ===== 
 +  - Please go to the Shuttle download area and download the appropriate BIOS version. \\ https://global.shuttle.com/support/download
   - Unpack the ZIP file into an empty folder.   - Unpack the ZIP file into an empty folder.
   - Copy the subfolder "DOS" to a bootable USB stick with DOS operating system.   - Copy the subfolder "DOS" to a bootable USB stick with DOS operating system.
   - Boot from the USB stick and change to the subfolder "DOS".   - Boot from the USB stick and change to the subfolder "DOS".
   - Execute the FLASH.BAT file.    - Execute the FLASH.BAT file. 
-  - The update process starts automatically. Finally, the operating system will reboot automatically. +  - The update process starts automatically. The system will reboot automatically. 
-  - After reboot please enter the BIOS setup program by pressing the "del" or "F2" key and load "Default Settings" and save the changes. +  - Once reboot is completed, please enter the BIOS setup program by pressing the "Del" or "F2" key and load the "Default Settings" (F3), then confirm by hitting Save & Exit. 
  
-**With Windows operating system** +===== How do I update the BIOS version in UEFI (UEFI Mode)? ===== 
-  - Please go to the Shuttle download area and download the appropriate BIOS version. \\ http://global.shuttle.com/download/download +  - Make sure the BIOS option **Secure Boot** is <wrap hi>disabled</wrap>.\\ {{:faq:hardware:bios:secure_boot_option.png?nolink&500|}} 
-  - Unpack the ZIP file into an empty folder on your hard disk. +  - Change "Boot Mode Select" to **UEFI**\\ {{:faq:hardware:bios:boot_mode_select_UEFI.png?nolink&500|}} 
-  - Explore the folder accordingly to your Windows version (32 bit or 64 bit). +  - Go to the Shuttle download area and download the appropriate BIOS version: https://global.shuttle.com/support/download 
-  - Please execute the EXE file with full administrator rights. +  - Unpack the ZIP file into an empty folder. 
-  - The update process starts automatically. Finally, the operating system will reboot automatically. +  - Copy the subfolders ''EFI'', ''SHELL'' and the file ''startup.nsh'' to a USB stick, formatted in FAT32.\\ {{:faq:hardware:bios:UEFI_bios_update_directory.png?nolink|}} 
-  - After reboot please enter the BIOS setup program by pressing the "del" or "F2" key and load "Default Settings" and save the changes. +  - Boot from the USB stick. You may have to press ''F7'' for boot device selection. Pick the USB drive containing the files. 
 +  - The update will start automatically. The system will reboot afterwards. 
 +  - Once reboot is completed, please enter the BIOS setup program by pressing the ''Del'' or ''F2'' key and load the "Default Settings" (''F3''), then confirm by hitting Save & Exit.\\ {{:faq:hardware:bios:uefi_bios_update_optimized_defaults.png?nolink&500|}}
  
 +===== How do I boot from a USB flash drive?  =====
 +  - Insert your USB flash drive into one of the USB Ports.
 +  - During boot process, press ESC (or F11 or F7) to enter the boot menu.  \\ {{:faq:hardware:bios:bootflashdos_04.png?nolink|}}
 +  - Select the USB-HDD or the relevant USB-ZIP (depending on the model of the USB flash drive, it may vary). On our latest XPC Barebones models, you will find your USB flash drive, if detected correctly, listed right below your hard disks.
 +  - Press the Return key to boot from your USB flash drive.
  
-===== How to make a bootable USB flash drive?  ===== 
-<WRAP center round important 60%> 
-Warning: Please be sure that there are no other USB devices connected to your system during formatting like external hard disks, external optical devices or other USB flash drives. This ensures that you only format the selected USB flash drive. 
-</WRAP> 
  
-The "BootFlashDos" tool is available at http://www.shuttle.eu/fileadmin/resources/support/faq/attachments/BootFlashDos.zip or http://www.gocoding.com.  +===== Where and how can I clear CMOS? ===== 
 +All settings and parameters defined in the BIOS are stored in CMOS. To delete these settings and reset CMOS, follow the instructions below.
  
-  - For Windows XP: please run BootFlashDos.exe \\ For Windows Vista/Windows 7: please run BootFlashDos.exe by selecting it with the right mouse button and select "Run as administrator". \\ {{:faq:hardware:bios:bootflashdos_01.png?nolink|}} {{:faq:hardware:bios:bootflashdos_02.png?nolink|}} +The instructions show examples of where the button or jumper to clear your machine's CMOS is located on different models. If you can't find the button/jumper on your model, more detailed information on type and position can be found in the Quick Guide (QIG) that came with your machine.
-  - Select your USB flash drive. If necessary, click Refresh to update the device list. +
-  - Select Quick Format. +
-  - Press Start and confirm the following Warning popup.+
  
-===== How to copy files to the created bootable USB flash drive? ===== +Remove the mains plug and reset/press the jumper/button for approx. 10 seconds. You may need to use a pointed object such as a ballpoint pen to push the button. After clearing CMOS, start up the computer and load "Optimized Defaults" in BIOS, save and restart.
-  - Open your Windows Explorer and select your USB flash drive. +
-  - Copy AWDFLASH.EXE and the latest BIOS Version to your USB flash drive. \\ {{:faq:hardware:bios:bootflashdos_03.png?nolink|}}+
  
 +==== Option A ====
 +{{:faq:hardware:bios:clear_cmos_01.jpg?nolink&300|}}\\ Clear CMOS jumper on the mainboard
 +==== Option B ====
 +{{:faq:hardware:bios:clear_cmos_02.jpg?nolink&300|}}\\ Clear CMOS button on the back of the machine (small opening bottom right)
 +==== Option C ====
 +{{:faq:hardware:bios:clear_cmos_03.jpg?nolink&300|}}\\ Clear CMOS button on the back of the machine (small opening top left)
 +==== Option D ====
 +{{:faq:hardware:bios:clear_cmos_04.jpg?nolink&300|}}\\ Four pins on the back of the machine (remove power cord and short them with a Phillips head screwdriver)
 +===== What does "Unknown flash type" mean when updating the BIOS? =====
 +This is a feature on the mainboard that protects the BIOS from being flashed accidentally. It is called BIOS flash protection. Please disable this function with either a hardware jumper setting or with the CMOS Setup Utility. Please refer to the manual for more details on how to disable flash protection.
  
-===== How to boot from USB flash drive?  ===== +===== How do I flash the BIOS under Windows? ===== 
-  - Insert your USB flash drive to your USB Ports. +First, please download the latest BIOS file from our download page, then proceed with the below instructions step by step.
-  - During boot process press ESC (or F11 or F7) to enter the boot menu.  \\ {{:faq:hardware:bios:bootflashdos_04.png?nolink|}} +
-  - Select USB-HDD or USB-ZIP (depending on the model of the USB flash drive, it may vary). On our newest XPC Barebones, you will find your USB flash drive, if detected correctly, listed right below your hard disks. +
-  - Press Return to boot from your USB flash drive.+
  
 +<WRAP important 60%>
 +Please double-check that all drivers are installed.
  
-===== How to perform a firmware update with the embedded EFI Shell? ===== +Since a background software, like an Anti-Virus programme, may affect the update process negatively and may lead to a failing flash process, we suggest to update the BIOS in DOS or UEFI mode instead of Windows.
-Many modern PCs (like XS35V4 and XS36V4) use a pure UEFI firmware instead of a traditional BIOS for hardware initialising. +
-<WRAP center round info 60%> +
-The terms UEFI firmware and BIOS are still used synonymously.+
 </WRAP> </WRAP>
-  - Please download the latest firmware and copy the unpacked files to a USB stick with FAT(32) file system. 
-  - Plug in your USB device, power on your PC and press the F7 key until the screen Please select boot device appears. \\ Select UEFI: Built-in EFI Shell and press the Enter key. \\ The system will now boot the embedded EFI Shell and prompt the Device Mapping Table. \\ {{:faq:hardware:bios:uefi_25.jpg?nolink|}} \\ {{:faq:hardware:bios:uefi_update_x15.jpg?nolink|}} 
-  - In order to access the USB device, identify the correct ID for the Removable Hard Disk from the Device Mapping Table. Please then type fs2: and hit Enter afterwards. If required, please change directories where the firmware update files are saved.The command to type is cd xs36. The files in the current folder can be listed using the dir command. Finally run the batch file flash64.nsh. Next, the firmware update process starts automatically and restarts the system afterwards. \\ {{:faq:hardware:bios:uefi_update_x16.jpg?nolink|}} 
  
-<WRAP center round important 60%> +  - Please unzip the BIOS file you just downloaded. 
-**Notice**: After performing a firmware update, please always ensure to have the operating system in use also selected in the firmware setup. \\ +  - Right-click on the BIOS file and select "Run as administrator" to start the flash tool. \\ {{:faq:hardware:bios:bios_update_windows_01.jpg?nolink&500|}} 
-To do so, please press the "Del" key while booting to enter the boot menu. Then navigate to "OS Selection". In case of a wrong setting here, not only the boot process of the existing Windows installation will fail, also changes on the specific drive may occur making booting impossible. +  - Please press any key to continue when the below page pops up. \\ {{:faq:hardware:bios:bios_update_windows_02.jpg?nolink&500|}} 
-</WRAP>+  - Wait for the update to complete and do not close the window. \\ {{:faq:hardware:bios:bios_update_windows_03.jpg?nolink&500|}} 
 +  - Once the flash process is completed, the computer automatically reboots. Please then press the "F1" key to continue and then "Del" to enter the BIOS setup menu. \\ {{:faq:hardware:bios:bios_update_windows_04.jpg?nolink&500|}} 
 +  - Please press the right arrow key to navigate to the "Save & Exit" tab and select "Load Defaults Settings", then hit "Yes". \\ {{:faq:hardware:bios:bios_update_windows_05.jpg?nolink&500|}} 
 +  - Please select the "Save Changes and Exit" option, and press "Yes" to save configurations. \\ {{:faq:hardware:bios:bios_update_windows_06.jpg?nolink&500|}} 
 +  - Now a re-start will be performed. 
 +  - Complete.
  
-===== How to update AMI BIOS in Windows? ===== +===== How do I update an AMI BIOS under Windows? ===== 
-  - Please go to download page and download AFUWIN +  - Please go to the relevant download page and download the FUWIN tool. 
-  - Extract and run the AFUWIN as administrator \\ {{:faq:hardware:bios:ami_bios_windows_01.jpg?nolink&400|}} +  - Extract and run the AFUWIN tool as administrator. \\ {{:faq:hardware:bios:ami_bios_windows_01.jpg?nolink&400|}} 
-  - Check the warning and close all other programs then press OK \\ {{:faq:hardware:bios:ami_bios_windows_02.jpg?nolink&400|}} +  - Read the message and close all other programmes, then press Ok. \\ {{:faq:hardware:bios:ami_bios_windows_02.jpg?nolink&400|}} 
-  - Choose Open file \\ {{:faq:hardware:bios:ami_bios_windows_03.jpg?nolink&400|}} +  - Please choose open file. \\ {{:faq:hardware:bios:ami_bios_windows_03.jpg?nolink&400|}} 
-  - Choose your Bios then enter Open \\ {{:faq:hardware:bios:ami_bios_windows_04.jpg?nolink&400|}} +  - Please open your BIOS ROM file. \\ {{:faq:hardware:bios:ami_bios_windows_04.jpg?nolink&400|}} 
-  - Check the Program All Blocks option then press the Flash button  \\ {{:faq:hardware:bios:ami_bios_windows_05.jpg?nolink&400|}} +  - Please make sure the option "Program All Blocks" is checked. Then press "Flash". \\ {{:faq:hardware:bios:ami_bios_windows_05.jpg?nolink&400|}} 
-  - Flash finish  \\ {{:faq:hardware:bios:ami_bios_windows_06.jpg?nolink&400|}} +  - The flash process finishes. \\ {{:faq:hardware:bios:ami_bios_windows_06.jpg?nolink&400|}} 
-  - Reboot your machine then enter Bios and Load Default Settings +  - Now, please reboot your machine, then enter BIOS and load the Default Settings. 
-  - SAVE to CMOS and EXIT+  - SAVE to CMOS and EXIT.
  
-===== Where and how can I clear CMOS? ===== +===== Manage power options in BIOS ===== 
-All settings and parameters defined in BIOS are stored in CMOS. To delete these settings and reset CMOS, follow the instructions below.+==== How does time-controlled switching on of the device work? ==== 
 +  - As a first step, please enter BIOS by pressing the ''Del'' key while booting. 
 +  - Navigate to the tab //Advanced//. 
 +  - Go to //Power Management Configuration// 
 +  - Now set //EuP Function// to //Disabled// to allow for further settings to be made. 
 +  - Proceed to setting //PowerOn by RTC Alarm// to //Enabled// so a specific time can be defined for the device to start. 
 +<WRAP info 60%> 
 +Please note that if the EuP function is deactivated, energy consumption may be higher in idle mode. 
 +</WRAP> 
 +==== Can the PC be started by hitting a key or mouse click? ==== 
 +Connected USB devices can wake the PC from sleep mode (S3). However, a cold start (if the PC was shut down before) is not possible in this way.
  
-The instructions show examples of where the button or jumper to clear your machine's CMOS is located on different models. If you can't find the button/jumper on your model, more detailed information on type and position can be found in the Quick Guide (QIG) that came with your machine. +If you have a Shuttle Mini-PC with an external power button connection, this can be used for a cold start. 
- +  - As a first step, please enter BIOS by pressing the ''Del'' key while booting. 
-Remove the mains plug and reset/press the jumper/button for approx. 10 seconds. You may need to use a pointed object such as a ballpoint pen to push the button. After clearing CMOS, start up the computer and load "Optimized Defaults" in BIOS, save and restart. +  - Navigate to the tab //Advanced//. 
- +  - Now please set //Wake Up by USB (S3)// to //Enabled// so the PC can be woken from S3 mode. 
-{{:faq:hardware:bios:clear_cmos_01.jpg?nolink&300|}} \\ Clear CMOS jumper on the mainboard +<WRAP important 60%> 
- +Please note that this may not work with all USB input devices. 
-{{:faq:hardware:bios:clear_cmos_02.jpg?nolink&300|}} \\ Clear CMOS button on the back of the machine (small opening bottom right) +</WRAP>
- +
-{{:faq:hardware:bios:clear_cmos_03.jpg?nolink&300|}} \\ Clear CMOS button on the back of the machine (small opening top left) +
- +
-===== What is "Unknown flash type" when updating BIOS? ===== +
-That is a feature on the mainboard that protect the BIOS from being flashed accidentally, it is called BIOS flash protection. Please disable this function by either the hardware jumper or in CMOS Setup Utility. Refer to user manual for more details on disabling flash protection.+
  
----- +==== Related Links ====
-==== Related links ====+
 {{backlinks>.}} {{backlinks>.}}
  • Last modified: 2016/08/29 14:30
  • by Shuttle