Differences

This shows you the differences between two versions of the page.


Previous revision
Next revision
faq:hardware:network [2020/03/26 16:38] – [Which drivers must be installed?] SH
Line 1: Line 1:
 +====== Network-related FAQs ======
 +====== Wake-on-LAN ======
 +==== What is WOL? ====
 +Wake-On-LAN (WOL) is a standard procedure to wake up a computer over a network. A special broadcast frame called "Magic Packet" is sent to the network adapter that triggers the startup process.
  
 +==== Which Shuttle models support WOL? ====
 +WOL (Wake-on-LAN) is supported by all Shuttle devices by default.
 +
 +:!: Note: This feature must be enabled in BIOS.
 +
 +==== How do I activate WOL? ====
 +Please start your Shuttle XPC and press the ''[DEL]'' or ''[F2]'' key while booting to enter BIOS. 
 +
 +  - Navigate to tab "Advanced"
 +  - Please deativate the EuP function.(1)
 +  - Now activate Wake Up by LAN (2)
 +  - To save, please press ''F4'' on your keyboard.
 +  
 +{{:faq:hardware:network:wol_bios.jpg?nolink&400|}}
 +
 +==== Which states can a Shuttle XPC be woken up from? ==== 
 +A Shuttle XPC supports the following states:
 + 
 +  - S3 (Suspend-to-RAM – STR)
 +  - S4 (Suspend-to-Disk – STD) 
 +  - S5 (Soft-Off) 
 +
 +==== Which drivers must be installed? ==== 
 +Please use the network card driver provided by Shuttle. 
 +
 +To activate WOL for Magic Packet, please start **Intel(R) PROSet Adapter Configuration Utility**.
 +Navigate to "Adapter Settings" -> "**wake on Magic Packet from power off**" and change the current value to **Enable** (Default Value : Disable)
 +
 +{{:faq:hardware:network:intel_wol2020.jpg?nolink&800|}}
 +
 +:!: The configuration menu and settings may vary depending on NIC vendor.
 +
 +==== How to get the MAC address of a PC ====
 +<WRAP tip 60%>
 +MAC = (Media Access Control) address\\ Example of a MAC address:  ''00:00:00:a1:2b:cc''
 +</WRAP>
 +
 +=== Windows ===
 +How to find the MAC address of a network card in Windows.
 +  - Press the Windows Start key to open the Start screen.
 +  - Type ''cmd'' and press Enter to launch the command prompt.
 +  - Type ''ipconfig /all'' at the command prompt to check the network card settings.
 +  - The MAC address and IP address are listed under the appropriate adapter as Physical Address and IPv4 Address.
 +=== Linux ===
 +Finding the MAC address varies across the different Linux/Unix operating systems.
 +  - In many systems, the following command will return the MAC address: ''ifconfig -a''
 +  - From the displayed information, find the correct ethernet adapter and locate the number next to the ''HWaddr''. This is your MAC address.
 +
 +==== How do I wake up a Shuttle XPC under Windows? ====
 +We therefore recommend the popular freeware tool "WakeonLan2" (WOL2) with support for Windows and Linux.
 +
 +^Tool^Download^ 
 +|WakeOnLan Tool 2|[[https://oette.wordpress.com/wol2/]]| 
 +
 +{{:faq:hardware:network:wol2_tool.png?nolink&400|}}
 +
 +==== How do I wake up a Shuttle XPC under Linux? ====
 +Firstly, please bootup the Shuttle XPC and active WOL in BIOS.
 +
 +WOL must also be activated under Debian/Ubuntu.
 +
 +Please use the following command: ''ethtool -s eth0 wol g''
 +
 +The etherwake command can be used to send a Wake-On-LAN "Magic Packet" under Linux operating systems.
 +
 +Please enter the following command to install etherwake under Debian/Ubuntu Linux desktop: ''$ sudo aptitude install etherwake''
 +
 +<WRAP center round important 30%>
 +Note: Red Hat Linux users should use the ''net-tools'' package which is installed by default.
 +</WRAP>
 +
 +To initiate the wake up process, please type the following command using the appropriate MAC-Address: ''# wakeonlan MAC-Address-Here''
  • Last modified: 2022/10/24 06:41
  • by Shuttle