Differences

This shows you the differences between two versions of the page.

--- faq:hardware:network [2018/07/09 10:09] – How to find the MAC address TS
+++ faq:hardware:network [2024/07/25 10:24] (current) – [Common Wi-Fi (WLAN) standards] Shuttle
@@ Line 1: / Line 1: @@
-====== Network-related FAQs ======
+====== Network-related FAQ ======
+====== WLAN ======
+===== Common Wi-Fi (WLAN) standards =====
+^Marketing Name(s)^Standard^Bandwidth^Band^Release^
+|WLAN 1 / Wi-Fi 1|IEEE 802.11a|2 Mbit/s|2.4 GHz|1999|
+|WLAN 2 / Wi-Fi 2|IEEE 802.11b|11 Mbit/s|2.4 GHz|1999|
+|WLAN 3 / Wi-Fi 3|IEEE 802.11g|up to 54 Mbit/s|2.4 GHz|2003|
+|WLAN 4 / Wi-Fi 4|IEEE 802.11n|up to 600 Mbit/s|2.4/5 GHz|2009|
+|WLAN 5 / Wi-Fi 5|IEEE 802.11ac|up to 1.3 Gbit/s|5 GHz|2014|
+|WLAN 6 / Wi-Fi 6|IEEE 802.11ax|up to 10 Gbit/s|2.4/5 GHz|2021|
+|WLAN 6e / Wi-Fi 6e|IEEE 802.11ax|up to 10 Gbit/s|2.4/5/6 GHz|2021|
+|WLAN 7 / Wi-Fi 7|IEEE 802.11be|up to 46 Gbit/s|2.4/5/6 GHz|2024|
 ====== Wake-on-LAN ======
 ==== What is WOL? ====
@@ Line 28: / Line 39: @@
 ==== Which drivers must be installed? ====
 Please use the network card driver provided by Shuttle.
-This driver is already preset for WOL use and requires no further settings.
-If you happen to run other drivers, please go to "Device Manager -> Network Adapter -> Properties" to activate WOL for Magic Packet.
+To activate WOL for Magic Packet, please start **Intel(R) PROSet Adapter Configuration Utility**.
+Navigate to "Adapter Settings" -> "**Wake on Magic Packet from power off**" and change the current value to **Enable** (Default Value: Disable)
-{{:faq:hardware:network:intel_wol.png?nolink&300|}}
+{{:faq:hardware:network:intel_wol2020.jpg?nolink&800|}}
 :!: The configuration menu and settings may vary depending on NIC vendor.