Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
faq:xpc_accessories:wwn01 [2018/07/06 13:45] – Renamed TSfaq:xpc_accessories:wwn01 [2021/11/11 09:19] (current) – Shuttle
Line 1: Line 1:
 ====== WWN01 ====== ====== WWN01 ======
 {{page>faq:xpc_slim:dl10j#which_lte_4g_modules_are_suitable&firstseconly&nofooter&noeditbutton&noreadmore}} {{page>faq:xpc_slim:dl10j#which_lte_4g_modules_are_suitable&firstseconly&nofooter&noeditbutton&noreadmore}}
 +{{page>faq:xpc_slim:dl10j#lte_module_cannot_be_found_in_the_device_manager&firstseconly&nofooter&noeditbutton&noreadmore}}
 {{page>compatibility#compatibility_table&firstseconly&nofooter&noeditbutton&noreadmore}} {{page>compatibility#compatibility_table&firstseconly&nofooter&noeditbutton&noreadmore}}
 +
 +
 +===== Software Installation and First Connect WWN01 LTE Module + Huawei EM906S LTE Module =====
 +:!: Please note: Before performing the below steps, please install the hardware according to the installation guide as found in the [[https://www.shuttle.eu/fileadmin/resources/download/spec/accessories/WWN01_e.pdf|specification PDF]].
 +
 +  - Please run **Windows Update** in order to install the driver for the //HUAWEI GNSS Sensor//. The other two components will use the Windows 10 inbox driver (1803 and newer).
 +    * Once the Windows Update process is completed, three devices should be listed in the device manager as shown below.\\ {{:faq:xpc_accessories:wwn:devmanager.jpg?nolink&400|}}
 +  - Check **Windows Settings** in **Network & Internet** for the newly available **Cellular** connection.
 +    * Here, you can also select under which conditions the Cellular connection should be used.\\ {{:faq:xpc_accessories:wwn:sysconfig.jpg?nolink&400|}}
 +  - The Cellular connection is also visible in the **Network Tray Symbol**, just where usually Wi-Fi signals can be found.\\ {{:faq:xpc_accessories:wwn:tray.jpg?nolink&300|}}\\ Click "Unlock SIM" to connect.\\ {{:faq:xpc_accessories:wwn:con1.jpg?nolink&400|}}
 +  - Enter the **PIN** (if applicable) of your SIM card and press "Next".\\ {{:faq:xpc_accessories:wwn:con2.jpg?nolink&400|}}
 +  - If the PIN was entered correctly and the SIM card is enabled for **DATA connection**, the connection should now be set up.\\ {{:faq:xpc_accessories:wwn:con3.jpg?nolink&400|}}
  
 ==== Related links ==== ==== Related links ====
 {{backlinks>.}} {{backlinks>.}}
  • Last modified: 2018/07/06 13:45
  • by TS