Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
faq:xpc_all-in-one:x50v5 [2018/07/16 12:24]
TS
faq:xpc_all-in-one:x50v5 [2018/07/16 12:47] (current)
CS [Setup touch screen in main display]
Line 3: Line 3:
 You may have missed to remove the transparent protection foil from the cover of the speakers located at the bottom of your All-in-One PC. You may have missed to remove the transparent protection foil from the cover of the speakers located at the bottom of your All-in-One PC.
  
-===== Setup touch screen in main display ===== +===== How do I set up the touchscreen as a main display===== 
-  - Open the eGalaxy touch tool\\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display01.jpg?​nolink&​350|}} +  - Open the eGalaxy touch tool.\\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display01.jpg?​nolink&​350|}} 
-  - Into the "​Display" ​page, confirm main screen is X50V5\\ ​Click to check option "​Enable Multiple Monitors"​ and "Map to main display if system has only one display monitor",​ and then click "​Apply"​\\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display02.jpg?​nolink&​350|}} +  - Go to the "​Display" ​tab, confirm ​the main screen is the one of the X50V5.\\ Check the option "​Enable Multiple Monitors"​ and "Map to main display if system has only one display monitor",​ and then click "​Apply"​.\\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display02.jpg?​nolink&​350|}} 
-  - Tool will confirm ​setting ​and inform need to do touch calibration ​again, please ​click "​Yes"​ and "​OK"​\\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display03.jpg?​nolink&​350|}} {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display04.jpg?​nolink&​350|}} +  - The tool will now confirm ​the settings ​and ask you to do calibrate the display ​again. Please ​click "​Yes"​ and "​OK"​.\\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display03.jpg?​nolink&​350|}} {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display04.jpg?​nolink&​350|}} 
-  - Please ​into the "​Tools" ​page and click "4 Points Calibration"​ to adjust ​touch screen\\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display05.jpg?​nolink&​350|}} {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display06.jpg?​nolink&​350|}} +  - Please ​go to the "​Tools" ​tab and click "4 Points Calibration"​ to adjust ​the touchscreen.\\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display05.jpg?​nolink&​350|}} {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display06.jpg?​nolink&​350|}} 
-  - After the adjust touch screen, please click "​OK"​ \\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display07.jpg?​nolink&​350|}} +  - Once the adjustment is properly performed, please click "​OK"​\\ {{:​faq:​xpc_all-in-one:​x50:​x50v5_touch_main_display07.jpg?​nolink&​350|}} 
-  - Finished. ​After the above adjustwhen you disconnect/​connect external monitor don't need to setup again.+  - Finished. ​With the above steps done, you won't need to go through this process ​again if an external monitor is connected.
  
 ==== Related links ==== ==== Related links ====
 {{backlinks>​.}} {{backlinks>​.}}
  • faq/xpc_all-in-one/x50v5.txt
  • Last modified: 2018/07/16 12:47
  • by CS