Differences

This shows you the differences between two versions of the page.

--- faq:xpc_cube:k45 [2015/09/09 15:39] – Shuttle
+++ faq:xpc_cube:k45 [2021/11/11 09:09] (current) – Shuttle
@@ Line 1: / Line 1: @@
 ====== K45 ======
-===== How to install I.C.E. Genie and parts in K45 and K48? =====
+===== How do I install the I.C.E. heatpipe cooling in a K45 and K48? =====
-In order to completely install I.C.E Genie and other parts, user must remove [[K45]]'s and [[K48]]'s motherboard out of the chassis.
+In order to install an I.C.E cooling the K45's or K48's motherboard must be removed.
 Please see the step-by-step graphical illustrations:
-  - Unplug the ATX 1 and 2 power connector from the motherboard. \\ {{:faq:xpc_cube:k45_k45_heatpipe_01.jpg?nolink&400|}}
+  - Unplug the ATX 1 and 2 power connector from the motherboard. \\ {{:faq:xpc_cube:k45:k45_heatpipe_01.jpg?nolink&400|}}
-  - Unplug the Front Panel internal USB cable from the motherboard. \\ {{:faq:xpc_cube:k45_k45_heatpipe_02.jpg?nolink&400|}}
+  - Unplug the Front Panel internal USB cable from the motherboard. \\ {{:faq:xpc_cube:k45:k45_heatpipe_02.jpg?nolink&400|}}
-  - Unfasten 3 screws from the back of K45 to take the power supply unit off the chassis. \\ {{:faq:xpc_cube:k45_k45_heatpipe_03.jpg?nolink&400|}}
+  - Unfasten three screws from the back of the K45 to take the power supply unit out of the chassis. \\ {{:faq:xpc_cube:k45:k45_heatpipe_03.jpg?nolink&400|}}
-  - Once the power supply unit is removed, please unfasten another 6 screws from the motherboard and remove the motherboard. \\ {{:faq:xpc_cube:k45_k45_heatpipe_04.jpg?nolink&300|}}
+  - Once the power supply unit is removed, please unfasten another six screws from the motherboard and remove the motherboard. \\ {{:faq:xpc_cube:k45:k45_heatpipe_04.jpg?nolink&300|}}
-  - Fasten all 4 screw standoffs onto the platform. \\ {{:faq:xpc_cube:k45_k45_heatpipe_05.jpg?nolink&400|}}
+  - Fasten all four screw standoffs on the platform. \\ {{:faq:xpc_cube:k45:k45_heatpipe_05.jpg?nolink&400|}}
-  - Make sure each one of standoffs is properly screwed in.  \\ {{:faq:xpc_cube:k45_k45_heatpipe_06.jpg?nolink&400|}}
+  - Make sure each standoff is properly screwed in place.  \\ {{:faq:xpc_cube:k45:k45_heatpipe_06.jpg?nolink&400|}}
-  - Install the motherboard back in place, and make sure standoffs underneath line with the screw holes on motherboard.  \\ {{:faq:xpc_cube:k45_k45_heatpipe_07.jpg?nolink&400|}}
+  - Re-install the motherboard and make sure the standoffs underneath line with the screw holes on motherboard.  \\ {{:faq:xpc_cube:k45:k45_heatpipe_07.jpg?nolink&400|}}
-  - Apply thermal compound on top of processor.  \\ {{:faq:xpc_cube:k45_k45_heatpipe_08.jpg?nolink&200|}}
+  - Apply thermal compound on atop the processor.  \\ {{:faq:xpc_cube:k45:k45_heatpipe_08.jpg?nolink&200|}}
-  - Install the I.C.E. Genie, fasten all four spring screws and plug the fan connector into FAN1 on the motherboard.  \\ {{:faq:xpc_cube:k45_k45_heatpipe_09.jpg?nolink&400|}}
+  - Install the I.C.E. cooling, re-fasten all four spring screws and plug the fan connector into FAN1 on the motherboard.  \\ {{:faq:xpc_cube:k45:k45_heatpipe_09.jpg?nolink&400|}}
-  - Reconnect the ATX 1 & 2 power connectors as well as the Front Panel USB cable and SATA cable. \\ {{:faq:xpc_cube:k45_k45_heatpipe_11.jpg?nolink&400|}}
+  - Re-connect the ATX 1 & 2 power connectors as well as the Front Panel USB cable and SATA cable. \\ {{:faq:xpc_cube:k45:k45_heatpipe_11.jpg?nolink&400|}}
-===== What kind of CPU can K45 support? =====
+===== What kind of processors does the K45 support? =====
-This FAQ refers to [[K45]], [[K45SE]]
+The K45 only supports Intel processors for socket LGA 775 with a TDP of up to 65 W. Please go to the [[https://global.shuttle.com/support/supportList|Shuttle website]] for the support list and also refer to the Intel website for more information.
-K45 only support processor under TDP 65W, please go to [[http://global.shuttle.com/support/supportList|Shuttle website]] checking support list and Intel website information.
-----
 ==== Related links ====
 {{backlinks>.}}