Differences

This shows you the differences between two versions of the page.

--- faq:xpc_cube:sb77g5 [2017/01/31 16:54] – Shuttle
+++ faq:xpc_cube:sb77g5 [2021/09/02 13:38] (current) – TS
@@ Line 1: / Line 1: @@
 ====== SB77G5======
-{{section>faq:xpc_cube:sg33g5#post_issuejp4_jumper_setting_for_shuttle_g5_models&firstseconly&nofooter&noeditbutton&noreadmore}}
+{{section>faq:xpc_cube:sg33g5#post_issue_on_shuttle_g5_models_-_check_setting_of_jumper_jp4&firstseconly&nofooter&noeditbutton&noreadmore}}
+{{section>faq:hardware:graphics#g-series&firstseconly&nofooter&noeditbutton&noreadmore}}
 ===== Why does the SB77G5 sometimes hang upon reboot?  =====
 This may be caused by an incorrect LAN firmware and chipset version. Please install the "Broadcom Advanced Control Suite" from your driver CD. You can check, if the versions match.
@@ Line 8: / Line 9: @@
 If the ASIC Version is BCM5705 A3 and Firmware Version is 5788, please follow the procedures below:
-  - Prepare a boot disk, [[http://download.shuttle.eu/Archive_2010/Barebone/SB77G5/Driver/5705%20firmware%20update%20new.zip|download this patch]] and unzip the files on a disk.
+  - Prepare a boot disk, [[https://download.shuttle.eu/Archive_2010/Barebone/SB77G5/Driver/5705%20firmware%20update%20new.zip|download this patch]] and unzip the files on a disk.
   - Shut down the SB77G5 and unplug the power cord for 30 seconds.
   - Boot the system with this boot disk and enter 5705.