Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
faq:xpc_cube:sb77g5 [2017/01/27 15:02] – [SG77G5] christianfaq:xpc_cube:sb77g5 [2021/09/02 13:38] (current) – TS
Line 1: Line 1:
-====== SG77G5====== +====== SB77G5====== 
-{{section>faq:xpc_cube:sg33g5#post_issuejp4_jumper_setting_for_shuttle_g5_models&firstseconly&nofooter&noeditbutton&noreadmore}}+{{section>faq:xpc_cube:sg33g5#post_issue_on_shuttle_g5_models_-_check_setting_of_jumper_jp4&firstseconly&nofooter&noeditbutton&noreadmore}} 
 +{{section>faq:hardware:graphics#g-series&firstseconly&nofooter&noeditbutton&noreadmore}}
 ===== Why does the SB77G5 sometimes hang upon reboot?  ===== ===== Why does the SB77G5 sometimes hang upon reboot?  =====
 This may be caused by an incorrect LAN firmware and chipset version. Please install the "Broadcom Advanced Control Suite" from your driver CD. You can check, if the versions match. This may be caused by an incorrect LAN firmware and chipset version. Please install the "Broadcom Advanced Control Suite" from your driver CD. You can check, if the versions match.
Line 6: Line 7:
 {{:faq:xpc_cube:sb77:sb77_lan_firmware.jpg?nolink&400|}} {{:faq:xpc_cube:sb77:sb77_lan_firmware.jpg?nolink&400|}}
  
-If the ASIC Version is BCM5705 A3 and Firmware Version is 5788. Please follow the procedures below:+If the ASIC Version is BCM5705 A3 and Firmware Version is 5788, please follow the procedures below:
  
-  - Prepare a boot disk, [[http://download.shuttle.eu/Archive_2010/Barebone/SB77G5/Driver/5705%20firmware%20update%20new.zip|download this patch]] and unzip the files onto the disk. +  - Prepare a boot disk, [[https://download.shuttle.eu/Archive_2010/Barebone/SB77G5/Driver/5705%20firmware%20update%20new.zip|download this patch]] and unzip the files on a disk. 
-  - Shut down SB77G5 and unplug the power core for 30sec. +  - Shut down the SB77G5 and unplug the power cord for 30 seconds. 
-  - Boot the system with this boot disk, and enter 5705.+  - Boot the system with this boot disk and enter 5705.
  
 <WRAP center round important 60%> <WRAP center round important 60%>
-Please note: this procedure only works when ASIC version is **5705** and Firmware version is **5788**.+Please note: This procedure only works if the ASIC version is **5705** and the Firmware version **5788**.
 </WRAP>  </WRAP> 
  
 ===== How do I install RAID drivers on the SB77G5 during Windows 2000 or Windows XP installation? ===== ===== How do I install RAID drivers on the SB77G5 during Windows 2000 or Windows XP installation? =====
-In order to install Windows 2000 or Windows XP RAID drivers on the SB77G5, a floppy drive and floppy disk with the RAID driver is needed.+In order to install Windows 2000 or Windows XP RAID drivers on the SB77G5, a floppy drive and floppy disk with the RAID driver is required.
  
-Before you start you will need to create a Intel RAID Driver Floppy Disk (create a Intel RAID Driver Floppy Disk or download the driver from here and extract/UnZip into a Floppy Disk directly): If you have the "Intel RAID Driver" disk from your XPC box, skip this step.+Before you start you will need to create an Intel RAID Driver Floppy Disk (create an Intel RAID Driver Floppy Disk or download the driver from here and extract/UnZip on a Floppy Disk directly): If you have the "Intel RAID Driver" disk from your XPC accessory box, skip this step.
  
-  - On a system running Windows, insert Motherboard Driver CD. +  - On a system running Windows, insert motherboard driver CD. 
-  - Insert a blank floppy diskette into the floppy drive. +  - Insert a blank floppy disk into the floppy drive. 
-  - Double-click on the D:\Intel\Raid\F6 install\F6 install.exe and answer all prompts presented (Assumes your CD ROM Drives label is D.) +  - Doubleclick on the D:\Intel\Raid\F6 install\F6 install.exe and answer all prompts presented (assuming your CD-ROM drives letter is D.) 
-  - When installation is complete, your floppy should contain the following files: iaStor.cat, iaStor.inf, iaStor.cat, License.txt, readme.txt and TXTSETUP.oem. +  - When the installation is completed, your floppy disk should contain the following files: iaStor.cat, iaStor.inf, iaStor.cat, License.txt, readme.txt and TXTSETUP.oem. 
-  - Go into the BIOS setup utility and enable Drive A and Onboard FDC Controller. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_01.jpg?nolink&400|}}+  - Go into the BIOS setup and enable Drive A and Onboard FDC Controller. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_01.jpg?nolink&400|}}
   - Enable Drive A. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_02.jpg?nolink&400|}}   - Enable Drive A. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_02.jpg?nolink&400|}}
   - Enable Onboard FDC Controller.   - Enable Onboard FDC Controller.
-  - Begin Windows installation \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_03.jpg?nolink&400|}} +  - Begin the Windows installation. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_03.jpg?nolink&400|}} 
-  - Press F6 function key when the Raid setup message string come up. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_04.jpg?nolink&400|}} +  - Press the F6 key when the RAID setup message comes up. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_04.jpg?nolink&400|}} 
-  - Press S key to select RAID driver. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_05.jpg?nolink&400|}} +  - Press the S key to select the RAID driver. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_05.jpg?nolink&400|}} 
-  - Insert the floppy disk you just made into the floppy drive. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_06.jpg?nolink&400|}} +  - Insert the floppy disk you just made into the floppy disk drive. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_06.jpg?nolink&400|}} 
-  - Select the driver for your operating system. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_07.jpg?nolink&400|}} +  - Select the relevant driver for your operating system. \\ {{:faq:xpc_cube:sb77:sb77_raid_installation_07.jpg?nolink&400|}} 
-  - After the driver has been installed, press Enter to continue installing Windows.+  - Once the driver is installed, press enter to continue the Windows installation.
  
 ==== Related links ==== ==== Related links ====
 {{backlinks>.}} {{backlinks>.}}
  • Last modified: 2017/01/27 15:02
  • by christian