Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
faq:xpc_cube:sd30g2_plus [2016/07/14 15:24]
Shuttle [Can I change The Default 667MHz Memory Frequency on SD30G2+ To The 800MHz Range when using 800 MHz RAM?]
faq:xpc_cube:sd30g2_plus [2017/01/31 11:33] (current)
CS [Can I change The Default 667MHz Memory Frequency on SD30G2+ To The 800MHz Range when using 800MHz RAM?]
Line 1: Line 1:
 ====== SD30G2 Plus ====== ====== SD30G2 Plus ======
-===== Can I change ​The Default 667MHz Memory Frequency on SD30G2+ To The 800MHz Range when using 800MHz RAM? ===== +===== Can I change ​the default 667 MHz memory frequency to 800 MHz when using 800 MHz memory in the SD30G2+? ===== 
-When tested with the SD30S1A7.BIN ​BIOS, the system will auto-detectcompatible, 800MHz ​memory at a frequency of 667MHz ​even after Loading ​Optimized ​Defaults ​in the BIOS. This is normal as this system is optimized to work with 667MHz RAMThough the system is designed to use 667MHz memory, it is possible to use 800MHz ​memory ​though it will be under-clocked to 667MHz.+If the BIOS version ​SD30S1A7.BIN ​is used, the system will auto-detect compatible ​800 MHz memory at a frequency of 667 MHz even if the Optimized ​Default settings are loaded ​in the BIOS. This is normalas this system is optimized to work with memory clocked at 667 MHz for security reasonsIt is still possible to run 800 MHz memory, however this will be clocked ​down to 667 MHz.
  
-With certain ​RAM, it is possible to over-clock ​the memory to the 800MHz range.+With certain ​memory modules ​it is possible to overclock ​the memory to 800 MHz.
  
-Please keep in mind that this is possible with certain ​memory. Some memory brands may not be compatible with this system and you will not be able to overclock them to the 800MHz range.+Please keep in mind that this is only possible with selected ​memory ​modules. Some memory brands may not be compatible with this system and you will not be able to overclock them to 800 MHz.
  
-To find out if your system is able to achieve ​this with yourparticularmemory please go into the Frequency/​Voltage Control section ​of the BIOS, locate DRAM Timing Selectable; ​change it from “By SPE,” to “Manual.” In the same section, navigate to “System Memory Frequency,” and change the setting to 800MHz ​or 834MHz, ​depending on what is available ​in the settingPress F10 to Save and Quit the BIOS. The system will reboot and should ​reflect ​the change ​in memory frequency as modified ​above.+To find out if your system is able to do this with your particular memoryplease go to the Frequency/​Voltage Control section ​in the BIOS, locate ​the DRAM Timings, ​change it from “By SPE,” to “Manual.” In the same section, ​please ​navigate to “System Memory Frequency” and change the setting to 800 MHz or 834 MHz depending on what is available. ​Then press F10 to Save and Quit the BIOS. The system will now reboot and should ​show the change ​of memory frequency as described ​above.
  
 ---- ----
 ==== Related links ==== ==== Related links ====
 {{backlinks>​.}} {{backlinks>​.}}
  • faq/xpc_cube/sd30g2_plus.txt
  • Last modified: 2017/01/31 11:33
  • by CS