Differences

This shows you the differences between two versions of the page.

--- faq:xpc_cube:sd37p2 [2017/02/01 10:13] – [Why my SD37P2 run unstable after I installed Adobe Premiere Elements?] christian
+++ faq:xpc_cube:sd37p2 [2021/08/09 12:31] – Shuttle
@@ Line 3: / Line 3: @@
 There are two versions of the SD37P2, V1 and V2. If you are not sure which version you purchased, please proceed as below to identify the version.
-^If the PCS is 1.X or the BIOS ID's 6th digit is 0, please download the BIOS SD37V1.x at: [[http://download.shuttle.eu/Mirror/XPC/SD37P2/|link]]^^
+^If the PCS is 1.X or the BIOS ID's 6th digit is 0, please download the BIOS SD37V1.x at: [[https://download.shuttle.eu/Mirror/XPC/SD37P2/|link]]^^
 |{{:faq:xpc_cube:sd37:sd37_identification_01.jpg?nolink&300|}}|{{:faq:xpc_cube:sd37:sd37_identification_02.jpg?nolink&300|}}|
-^If the PCB is 2.X or the BIOS ID's 6th digit is 2, please download the BIOS SD37V2.X at: [[http://download.shuttle.eu/Mirror/XPC/SD37P2_V2/Bios/|link]]^^
+^If the PCB is 2.X or the BIOS ID's 6th digit is 2, please download the BIOS SD37V2.X at: [[https://download.shuttle.eu/Mirror/XPC/SD37P2_V2/Bios/|link]]^^
 |{{:faq:xpc_cube:sd37:sd37_identification_03.jpg?nolink&300|}}|{{:faq:xpc_cube:sd37:sd37_identification_04.jpg?nolink&300|}}|
@@ Line 15: / Line 15: @@
 ===== Why does my SD37P2 run unstable when I install Adobe Premiere Elements? =====
-This is because Adobe Premiere Elements has compatibility issues with the Realtek audio driver. A new Realtek driver will help. Please update to version R1.35 ([[http://download.shuttle.eu/Archive_2004/Drivers/new/sd37p2/old%20audio/audio.zip|Download]]). For more information, please also [[http://www.adobe.com/support/techdocs/332888.html|visit Adobe]].
+This is because Adobe Premiere Elements has compatibility issues with the Realtek audio driver. A new Realtek driver will help. Please update to version R1.35 ([[https://download.shuttle.eu/Archive_2004/Drivers/new/sd37p2/old%20audio/audio.zip|Download]]). For more information, please also [[http://www.adobe.com/support/techdocs/332888.html|visit Adobe]].
-===== How to get the best use of SD37P2 in Dual Channel mode and what aspects should be pay attention to? =====
+===== How do I get the best out of my memory in Dual Channel mode and what aspects should I pay attention to? =====
-To enable your SD37P2 memory DDR2 with Dual Channel, please refer to the steps below.
+To enable your SD37P2 DDR2 memory in Dual Channel mode, please refer to the steps below.
-  - Please make sure to put the same memory DDR2 in the same color slot. (If putting memories into the different color slots, XPC will run in a Single Channel Mode.) \\ {{:faq:xpc_cube:sd37:sd37_dual_channel_01.jpg?nolink&400|}}
+  - Please make sure to put the very same DDR2 memory (type and brand) in the slot of the same colour. (If modules are installed in slots of different colour, they will run in Single Channel mode.) \\ {{:faq:xpc_cube:sd37:sd37_dual_channel_01.jpg?nolink&400|}}
-  - If the memories have been set up successfully, the function of Dual Channel will be detected and will also show the message on the screen while XPC is starting. Thus the function of Dual Channel would be normally operated. \\ {{:faq:xpc_cube:sd37:sd37_dual_channel_02.jpg?nolink&400|}}
+  - If the modules are installed correctly, Dual Channel will be shown on a screen when booting the XPC. \\ {{:faq:xpc_cube:sd37:sd37_dual_channel_02.jpg?nolink&400|}}
-  - If memories DDR2 set on the different color memory slots, it doesn't show "Dual Channel Mode enables" on the screen. And it will be a Single Channel Mode only. \\ {{:faq:xpc_cube:sd37:sd37_dual_channel_03.jpg?nolink&400|}}
+  - Should the message "Dual Channel Mode Enabled" not be displayed while booting, the memory is running in Single Channel mode only. \\ {{:faq:xpc_cube:sd37:sd37_dual_channel_03.jpg?nolink&400|}}
-===== Why my DDRII 800 only show DDRII 667 at POST screen? =====
+===== Why is my DDR2-800 memory only displayed as DDR2-667 on the POST screen? =====
-According to Intel's SPEC for chipset 975X, it can only support up to 2 DDRII 800. If your memory modules show DDR667, you will adjust the frequency speed by manually in the BIOS. You may follow below instruction for setup.
+According to Intel's specifications of the 975X chipset, it supports a total of two DDR2-800 modules. If your memory modules are shown as DDR2-667, you will need to set the frequency speed manually in the BIOS. Please follow the below steps.
-  - Boot Into BIOS, and select the Frequency/Voltage Control \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_01.jpg?nolink&400|}}
+  - Enter BIOS and go to Frequency/Voltage Control. \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_01.jpg?nolink&400|}}
-  - DRAM Timing Selectable selects the Manual \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_02.jpg?nolink&400|}}
+  - Under DRAM Timing Selectable select "Manual". \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_02.jpg?nolink&400|}}
-  - System Memory Frequency select to 800MHz \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_03.jpg?nolink&400|}}
+  - Set System Memory Frequency to 800 MHz. \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_03.jpg?nolink&400|}}
-  - Press F10 key save to CMOS and EXIT \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_04.jpg?nolink&400|}}
+  - Press the F10 key to save changes to CMOS and exit BIOS. \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_04.jpg?nolink&400|}}
-  - Check the post screen is DDRII 800 \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_05.jpg?nolink&400|}}
+  - Check the post screen whether it shows DDR2-800. \\ {{:faq:xpc_cube:sd37:sd37_ddr2_800_05.jpg?nolink&400|}}
 ==== Related links ====
 {{backlinks>.}}