Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
faq:xpc_cube:sd37p2 [2017/02/01 09:54]
CS [Why my SD37P2 can not support some ATI graphic chip video card?]
faq:xpc_cube:sd37p2 [2017/02/01 10:54] (current)
CS [Why is my DDR2-800 memory only displayed as DDR2-667 on the POST screen?]
Line 9: Line 9:
  
 ===== Why won't my SD37P2 support some of ATI's video cards? ===== ===== Why won't my SD37P2 support some of ATI's video cards? =====
-The SD37P2 has two PCI-E slots. The PCI-E 16x bandwidth will be halved to 8x speed delivered by each slot. If your video card only supports 16x speed, it will not run on this system. Please check your video card specifications or contact your video card vendor for detailed information.+The SD37P2 has two PCI-E slots. The PCI-E 16x bandwidth will be halved to 8x speed on each slot. If your video card only supports 16x speed, it will not run on this system. Please check your video card specifications or contact your video card vendor for detailed information.
  
-===== Does SD37P2 ​can support ​DIMMs of DDR2 667? ===== +===== Does my SD37P2 support ​four DIMMs of DDR2-667 memory? ===== 
-This model can support four DIMMs of DDRII 667 of memoryIf the system could not run stable ​with 667MHz on your DDRIIit will automatic adjust ​to 533MHz for stabilization of the system+Yes, it doesShould it however turn out that it won'​t ​run stable, ​the system ​will automatically clock down the memory ​to 533 MHz to stabilise.
  
-===== Why my SD37P2 run unstable ​after installed ​Adobe Premiere Elements? ===== +===== Why does my SD37P2 run unstable ​when install ​Adobe Premiere Elements? ===== 
-Because ​Adobe Premiere Elements ​have compatibility ​issue with Realtek audio driver. ​The new Realtek driver ​can solve this issueAdobe has suggest the user has using Premiere Elements ​to go Realtek and download the audio driver Version ​R1.35 ([[http://​download.shuttle.eu/​Archive_2004/​Drivers/​new/​sd37p2/​old%20audio/​audio.zip|Download]]) ​to solve this problem. For more information, ​we will suggest you to [[http://​www.adobe.com/​support/​techdocs/​332888.html|visit Adobe]] ​for more detail instruction+This is because ​Adobe Premiere Elements ​has compatibility ​issues ​with the Realtek audio driver. ​new Realtek driver ​will helpPlease update ​to version ​R1.35 ([[http://​download.shuttle.eu/​Archive_2004/​Drivers/​new/​sd37p2/​old%20audio/​audio.zip|Download]]). For more information, ​please also [[http://​www.adobe.com/​support/​techdocs/​332888.html|visit Adobe]]. ​
  
-===== How to get the best use of SD37P2 ​in Dual Channel mode and what aspects should ​be pay attention to? ===== +===== How do I get the best out of my memory ​in Dual Channel mode and what aspects should ​pay attention to? ===== 
-To enable your SD37P2 ​memory ​DDR2 with Dual Channel, please refer to the steps below.+To enable your SD37P2 DDR2 memory in Dual Channel ​mode, please refer to the steps below.
  
-  - Please make sure to put the same memory ​DDR2 in the same color slot. (If putting memories into the different ​color slotsXPC will run in Single Channel ​Mode.) \\ {{:​faq:​xpc_cube:​sd37:​sd37_dual_channel_01.jpg?​nolink&​400|}} +  - Please make sure to put the very same DDR2 memory (type and brand) ​in the slot of the same colour. (If modules are installed in slots of different ​colourthey will run in Single Channel ​mode.) \\ {{:​faq:​xpc_cube:​sd37:​sd37_dual_channel_01.jpg?​nolink&​400|}} 
-  - If the memories have been set up successfullythe function of Dual Channel will be detected and will also show the message ​on the screen while XPC is starting. Thus the function of Dual Channel would be normally operated. \\ {{:​faq:​xpc_cube:​sd37:​sd37_dual_channel_02.jpg?​nolink&​400|}} +  - If the modules are installed correctly, Dual Channel will be shown on a screen when booting ​the XPC. \\ {{:​faq:​xpc_cube:​sd37:​sd37_dual_channel_02.jpg?​nolink&​400|}} 
-  - If memories DDR2 set on the different color memory slots, it doesn'​t show "Dual Channel Mode enables" ​on the screen. And it will be a Single Channel ​Mode only. \\ {{:​faq:​xpc_cube:​sd37:​sd37_dual_channel_03.jpg?​nolink&​400|}}+  - Should ​the message ​"Dual Channel Mode Enabled" ​not be displayed while booting, ​the memory is running in Single Channel ​mode only. \\ {{:​faq:​xpc_cube:​sd37:​sd37_dual_channel_03.jpg?​nolink&​400|}}
  
-===== Why my DDRII 800 only show DDRII 667 at POST screen? ===== +===== Why is my DDR2-800 memory ​only displayed as DDR2-667 on the POST screen? ===== 
-According to Intel'​s ​SPEC for chipset ​975X, it can only support up to 2 DDRII 800. If your memory modules ​show DDR667, you will adjust ​the frequency speed by manually in the BIOS. You may follow below instruction for setup.+According to Intel'​s ​specifications of the 975X chipset, it supports a total of two DDR2-800 modules. If your memory modules ​are shown as DDR2-667, you will need to set the frequency speed manually in the BIOS. Please ​follow ​the below steps.
  
-  - Boot Into BIOSand select the Frequency/​Voltage Control \\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_01.jpg?​nolink&​400|}} +  - Enter BIOS and go to Frequency/​Voltage Control\\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_01.jpg?​nolink&​400|}} 
-  - DRAM Timing Selectable ​selects the Manual \\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_02.jpg?​nolink&​400|}} +  - Under DRAM Timing Selectable ​select "Manual"​. ​\\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_02.jpg?​nolink&​400|}} 
-  - System Memory Frequency ​select ​to 800MHz ​\\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_03.jpg?​nolink&​400|}} +  - Set System Memory Frequency to 800 MHz. \\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_03.jpg?​nolink&​400|}} 
-  - Press F10 key save to CMOS and EXIT \\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_04.jpg?​nolink&​400|}} +  - Press the F10 key to save changes ​to CMOS and exit BIOS. \\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_04.jpg?​nolink&​400|}} 
-  - Check the post screen ​is DDRII 800 \\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_05.jpg?​nolink&​400|}}+  - Check the post screen ​whether it shows DDR2-800\\ {{:​faq:​xpc_cube:​sd37:​sd37_ddr2_800_05.jpg?​nolink&​400|}}
  
 ==== Related links ==== ==== Related links ====
 {{backlinks>​.}} {{backlinks>​.}}
  • Last modified: 2017/02/01 09:54
  • by CS