Differences

This shows you the differences between two versions of the page.

--- faq:xpc_cube:sg31g2 [2015/09/03 16:04] – created Shuttle
+++ faq:xpc_cube:sg31g2 [2021/09/02 13:39] (current) – TS
@@ Line 1: / Line 1: @@
 ====== SG31G2 ======
-===== How to identify SG31G2 and SG31G2V2? =====
+{{section>faq:hardware:graphics#g-series&firstseconly&nofooter&noeditbutton&noreadmore}}
+===== How can I identify an SG31G2 and SG31G2V2? =====
 This FAQ refers to [[SG31G2]], [[SG31G2V2]]
-You can identify the version from the picture below.
+You can identify the version as shown in the picture below.
 {{:faq:xpc_cube:sg31:sg31_identification_01.jpg?nolink&400|}}
+===== How can I identify the SG31G2's PCB version? =====
+You can identify the version as shown in the picture below.
+ {{:faq:xpc_cube:sg31:sg31_bios_01.jpg?nolink&300|}}  {{:faq:xpc_cube:sg31:sg31_bios_02.jpg?nolink&300|}}
+===== How should I proceed to perform a BIOS update on my SG31G2? =====
+  - Verify the version of your motherboard.
+  - If your motherboard version is V1.2, please download SG31S1XX. \\ {{:faq:xpc_cube:sg31:sg31_bios_01.jpg?nolink&300|}}
+  - If your motherboard version is V2.0, please download SG31S2XX. \\ {{:faq:xpc_cube:sg31:sg31_bios_02.jpg?nolink&300|}}
+  - Prepare a bootable USB flash drive.
+  - Download the AWDFLASH tool and the relevant BIOS version. Copy both to the mentioned USB flash drive.
+  - Run the flash tool in DOS mode.
+  - Please enter the code as below. \\ {{:faq:xpc_cube:sg31:sg31_bios_03.jpg?nolink&300|}}
+  - Then the system will start the flash process and reboot. \\ {{:faq:xpc_cube:sg31:sg31_bios_04.jpg?nolink&300|}}
+  - After reboot, please press the Del button to enter BIOS. \\ {{:faq:xpc_cube:sg31:sg31_bios_05.jpg?nolink&300|}}
+  - Load the Optimized Default settings. \\ {{:faq:xpc_cube:sg31:sg31_bios_06.jpg?nolink&300|}}
+  - Save changes to CMOS and exit BIOS. \\ {{:faq:xpc_cube:sg31:sg31_bios_07.jpg?nolink&300|}}
 ----
 ==== Related links ====
 {{backlinks>.}}