Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
faq:xpc_cube:sg31g2 [2015/09/07 12:45] Shuttlefaq:xpc_cube:sg31g2 [2021/09/02 13:39] (current) TS
Line 1: Line 1:
 ====== SG31G2 ====== ====== SG31G2 ======
-===== How to identify SG31G2 and SG31G2V2? =====+{{section>faq:hardware:graphics#g-series&firstseconly&nofooter&noeditbutton&noreadmore}} 
 +===== How can I identify an SG31G2 and SG31G2V2? =====
 This FAQ refers to [[SG31G2]], [[SG31G2V2]] This FAQ refers to [[SG31G2]], [[SG31G2V2]]
  
-You can identify the version from the picture below.+You can identify the version as shown in the picture below.
  
 {{:faq:xpc_cube:sg31:sg31_identification_01.jpg?nolink&400|}} {{:faq:xpc_cube:sg31:sg31_identification_01.jpg?nolink&400|}}
  
-===== When updated the SG31G2 BIOS, what should I notice? ===== +===== How can identify the SG31G2's PCB version? ===== 
-  - If your motherboard version is V1.2, please download SG31S1XX \\ {{:faq:xpc_cube:sg31:sg31_bios_01.jpg?nolink&300|}} +You can identify the version as shown in the picture below. 
-  - If your motherboard version is V2.0, please download SG31S2XX \\ {{:faq:xpc_cube:sg31:sg31_bios_02.jpg?nolink&300|}} + 
-  - Make USB flash bootable+ {{:faq:xpc_cube:sg31:sg31_bios_01.jpg?nolink&300|}}  {{:faq:xpc_cube:sg31:sg31_bios_02.jpg?nolink&300|}} 
-  - Download AWDFLASH tool and BIOS and copy to USB flash. + 
-  - Use the USB flash bootable to DOS mode. +===== How should I proceed to perform a BIOS update on my SG31G2? ===== 
-  - Please input the code like below. \\ {{:faq:xpc_cube:sg31:sg31_bios_03.jpg?nolink&300|}} + 
-  - Then the system will auto flash and reboot. \\ {{:faq:xpc_cube:sg31:sg31_bios_04.jpg?nolink&300|}} +  - Verify the version of your motherboard. 
-  - After reboot the system, please press DEL button to the BIOS setting. \\ {{:faq:xpc_cube:sg31:sg31_bios_05.jpg?nolink&300|}} +  - If your motherboard version is V1.2, please download SG31S1XX\\ {{:faq:xpc_cube:sg31:sg31_bios_01.jpg?nolink&300|}} 
-  - Load defaults setting. \\ {{:faq:xpc_cube:sg31:sg31_bios_06.jpg?nolink&300|}} +  - If your motherboard version is V2.0, please download SG31S2XX\\ {{:faq:xpc_cube:sg31:sg31_bios_02.jpg?nolink&300|}} 
-  - Save to CMOS and exit. \\ {{:faq:xpc_cube:sg31:sg31_bios_07.jpg?nolink&300|}}+  - Prepare a bootable USB flash drive
 +  - Download the AWDFLASH tool and the relevant BIOS version. Copy both to the mentioned USB flash drive
 +  - Run the flash tool in DOS mode. 
 +  - Please enter the code as below. \\ {{:faq:xpc_cube:sg31:sg31_bios_03.jpg?nolink&300|}} 
 +  - Then the system will start the flash process and reboot. \\ {{:faq:xpc_cube:sg31:sg31_bios_04.jpg?nolink&300|}} 
 +  - After reboot, please press the Del button to enter BIOS. \\ {{:faq:xpc_cube:sg31:sg31_bios_05.jpg?nolink&300|}} 
 +  - Load the Optimized Default settings. \\ {{:faq:xpc_cube:sg31:sg31_bios_06.jpg?nolink&300|}} 
 +  - Save changes to CMOS and exit BIOS. \\ {{:faq:xpc_cube:sg31:sg31_bios_07.jpg?nolink&300|}}
  
 ---- ----
 ==== Related links ==== ==== Related links ====
 {{backlinks>.}} {{backlinks>.}}
  • Last modified: 2015/09/07 12:45
  • by Shuttle