Differences

This shows you the differences between two versions of the page.

--- faq:xpc_cube:sk43g [2016/08/26 13:04] – created Shuttle
+++ faq:xpc_cube:sk43g [2021/09/02 13:41] (current) – TS
@@ Line 1: / Line 1: @@
 ====== SK43G ======
+{{section>faq:hardware:graphics#g-series&firstseconly&nofooter&noeditbutton&noreadmore}}
 ===== How do I install the OS on a SATA with RAID hard drive on the SK43G? =====
 To begin, installation of SATA with RAID hard drives on the SK43G requires a floppy drive (or USB floppy drive) and floppy disk with the correct RAID driver.
@@ Line 6: / Line 7: @@
   - Insert the motherboard driver CD into your CD-ROM.
-  - Copy all files in RAID directory (D:\VIA\RAID\DriverDisk\SATA) to a floppy disk. (Current CD driver is in Drive D) or [[http://download.shuttle.eu/Archive_2010/Barebone/SK43G/Driver/via%20raid%20driver.zip|download from here]].
+  - Copy all files in RAID directory (D:\VIA\RAID\DriverDisk\SATA) to a floppy disk. (Current CD driver is in Drive D) or [[https://download.shuttle.eu/Archive_2010/Barebone/SK43G/Driver/via%20raid%20driver.zip|download from here]].
   - Use the floppy disk in the installation procedure as follows:
     - Installing Windows, Press F6 function key when RAID setup message string come up. \\ {{:faq:xpc_cube:sk43:sk43g_os_sata_raid_01.jpg?nolink&500|}}