Differences

This shows you the differences between two versions of the page.

--- faq:xpc_cube:st20g5 [2016/08/26 12:40] – created Shuttle
+++ faq:xpc_cube:st20g5 [2021/09/02 13:43] (current) – TS
@@ Line 1: / Line 1: @@
 ====== ST20G5 ======
-{{section>faq:xpc_cube:sg33g5#post_issuejp4_jumper_setting_for_shuttle_g5_models&firstseconly&nofooter&noeditbutton&noreadmore}}
+{{section>faq:xpc_cube:sg33g5#post_issue_on_shuttle_g5_models_-_check_setting_of_jumper_jp4&firstseconly&nofooter&noeditbutton&noreadmore}}
+{{section>faq:hardware:graphics#g-series&firstseconly&nofooter&noeditbutton&noreadmore}}
+===== Windows 2000 and XP installation on a Serial ATA(SATA)/RAID Hard Drive =====
+To install an Windows 2000 or XP on a SATA/RAID hard drive, a floppy drive (or USB floppy drive) and floppy disk with the correct RAID drivers are essential.
+The RAID floppy disk comes bundled in the accessory package. If the RAID floppy disk is missing, the steps below will help to create another substitute disk. (Those procedures will need to be done on other system):
+  - Insert the motherboard driver CD into your CD-ROM. Copy all files in RAID directory ''D:\ULi\South_driver\SATA50XX_Raid_FDD'' to a blank floppy disk. (Current CD driver is in Drive D) or download the files here and extract them to a blank floppy disk. \\ Note: Windows 2000 and XP installation on a Serial ATA(SATA) HD requires RAID driver. Repeat, you must install RAID driver if you like to use Serial ATA(SATA) Hard Drive.
+  - Installation in SATA mode:
+    - The following procedure outlines the important steps in installing Windows on a Serial ATA drive. Before you begin, please make sure the RAID driver disk is inserted in the floppy drive, and the floppy drive is connected to the computer.
+    - Installing Windows (Please refer to the ULi RAID manual P13.) \\ {{:faq:xpc_cube:st20:st20_raid_installation_01.jpg?nolink&400|}}
+    - Press ''F6'' function key when RAID setup message string come up. \\ {{:faq:xpc_cube:st20:st20_raid_installation_02.jpg?nolink&400|}}
+    - Press ''S'' key to select RAID driver. \\ Note: You must install RAID DRIVERS for SATA HD. Please follow the procedure below carefully to ensure successful RAID installation. \\ {{:faq:xpc_cube:st20:st20_raid_installation_03.jpg?nolink&400|}}
+    - Press "Enter" to select the ''ULi SATA Controller(M5287, Windows XP/Server 2003)''.
+    - The following Windows Setup screen appears listing the drivers that you choose. \\ {{:faq:xpc_cube:st20:st20_raid_installation_04.jpg?nolink&400|}}
+    - After the drivers are selected, press Enter to continue installing Windows.
+  - Installation in RAID mode:
+    - Pre-installation setup for RAID mode.
+    - In BIOS you will need to enable RAID functionality. \\ {{:faq:xpc_cube:st20:st20_raid_installation_05.jpg?nolink&400|}}
+    - Enter ''Integrated Peripherals'' \\ {{:faq:xpc_cube:st20:st20_raid_installation_06.jpg?nolink&400|}}
+    - Enter ''South Configuration'' \\ {{:faq:xpc_cube:st20:st20_raid_installation_07.jpg?nolink&400|}}
+    - Enable ''Serial ATA RAID Mode'', press ''F10'' to save the configuration and exit. \\ {{:faq:xpc_cube:st20:st20_raid_installation_08.jpg?nolink&400|}}
+    - Press ''Ctrl-A'' to enter ''ULi RAID BIOS Setup Utility'' and select the drives that you wish to use in a RAID array. (Please refer to the ULi RAID manual P3).
+    - Installing Windows
+    - The following procedure outlines the important steps in installing Windows on a RAID drive. Before you begin, please make sure the RAID driver disk is inserted in the floppy drive, and the floppy drive is connected to the computer.
+    - Installing Windows (Please refer to the ULi RAID manual P13) \\ {{:faq:xpc_cube:st20:st20_raid_installation_09.jpg?nolink&400|}}
+    - Press ''F6'' function key when RAID setup message string come up. \\ {{:faq:xpc_cube:st20:st20_raid_installation_10.jpg?nolink&400|}}
+    - Press ''S'' key to select RAID driver. \\ {{:faq:xpc_cube:st20:st20_raid_installation_11.jpg?nolink&400|}}
+    - Press "Enter" to select the ''ULi SATA Controller(M5287, Windows XP/Server 2003)''.
+    - The following Windows Setup screen appears listing the drivers that you choose. \\ {{:faq:xpc_cube:st20:st20_raid_installation_12.jpg?nolink&400|}}
+    - After the drivers are selected, press Enter to continue installing Windows.
 ==== Related links ====
 {{backlinks>.}}