Differences

This shows you the differences between two versions of the page.

--- faq:xpc_nano:nc03u [2019/07/10 14:59] – TS
+++ faq:xpc_nano:nc03u [2019/07/24 10:02] – [HDD Installation] christian
@@ Line 5: / Line 5: @@
 ==== Begin Installation =====
 <WRAP important 60%>
-The unit can be operated at an ambient temperature of max. 50°C (122°F).\\ Do not expose it to temperatures below 0°C (32°F) or above 50°C (122°F).
+The unit can be operated at a maximum ambient temperature of 50°C (122°F).\\ Do not expose it to temperatures below 0°C (32°F) or above 50°C (122°F).
 </WRAP>
 <WRAP important 60%>
@@ Line 32: / Line 32: @@
 ==== HDD Installation ====
 <WRAP important 60%>
-This model supports 2.5" SATA HDDs up to a thickness of 15mm.
+This model supports 2.5" drives (HDDs and SSDs) up to a thickness of 15mm.
 </WRAP>
-  - Mount the HDD into the bracket with four screws.\\ {{:faq:xpc_nano:nc03:installation11.png?nolink&500|}}
+  - Mount the drive in the bracket with four screws.\\ {{:faq:xpc_nano:nc03:installation11.png?nolink&500|}}
-  - Install the HDD with its bracket in the chassis with four screws and tear off the adhesive tape of the HDD cable.\\ {{:faq:xpc_nano:nc03:installation12.png?nolink&500|}}
+  - Install the drive sitting in its bracket in the chassis and secure with four screws. Tear off the adhesive tape of the SATA cable.\\ {{:faq:xpc_nano:nc03:installation12.png?nolink&500|}}
-  - Connect the HDD with HDD cable.\\ {{:faq:xpc_nano:nc03:installation13.png?nolink&500|}}
+  - Connect the drive with the cable.\\ {{:faq:xpc_nano:nc03:installation13.png?nolink&500|}}
   - Replace the cover and refasten the two screws.\\ {{:faq:xpc_nano:nc03:installation14.png?nolink&500|}}