This is an old revision of the document!


DH02U5

Because the DH02U has a built-in NVIDIA GTX 1050 graphics card, you can use the surround function of the NVIDIA Control Panel to set up a TV wall. This function is controlled by the specification of the NVIDIA driver.

Currently there are three output resolutions available, i.e. 7680×4320, 4096×3072, 3200×2400. Other resolutions are not yet supported.

If you just need a general display or extended display function, you can use the built-in display settings function of Windows. Please refer to the following steps to set up the surround function of the NVIDIA Control Panel.

  1. Please click the right mouse button first, and then select “NVIDIA Control Panel”.

  1. Please click “Configure Surround, PhysX”.
  2. Please check “Span displays with Surround”.
  3. Please click “Configure…”, it will open the NVIDIA Set Up Surround page.

  1. Please confirm that all screens are checked.
  2. Please select 2×2 mode.
  3. Please move the screen to the corresponding position.
  4. Please click “Enable Surround” to enable the TV wall function.

  1. Please select one of these three resolutions (7680×4320, 4096×3072, 3200×2400).
  2. Please click “Apply” to complete.

If you need to disable the video wall function again, please refer to the above steps to open the NVIDIA Set Up Surround page, then click “Disable Surround” to disable the video wall function.

No, because the DH02U needs to match Shuttle's optimised NVIDIA graphics card driver, and to maintain the system's optimal performance and stability, please refer to the Shuttle website.

The DH02U uses a mobile processor with an NVIDIA notebook graphics card driver, so that a “No battery present” icon appears in the Windows task bar. This, however, has no effect on the DH02U and can be ignored.

  • Last modified: 2018/07/05 09:50
  • by SH