Action disabled: source

DH310

All Shuttle PC products with socket LGA 1151v2 are prepared to support the 9th generation Intel Core processors, also called “Coffee Lake Refresh”, which Intel released in Q4 2018. However, some steps need to be done before the PC can boot with this kind of processors.

  1. Please enter the BIOS setup program to check your current BIOS version.
  2. If the BIOS needs to be updated, please download the latest BIOS file from https://global.shuttle.com/support/download.
  3. The BIOS Update must be done with a compatible 8th generation Intel Core processor (“Coffee Lake”).
Product NameTypeChipsetBIOS version (at least)
DH310XPC slim (1.3L)H310Version DH310000.105 or later
DH310V2Version DH310200.101 or later
DH310SVersion DH310100.103 or later
DH370H370Version DH370000.102 or later
SH310R4XPC cubeH310Version SH310000.102 or later
SH370R6H370Version SH370000.105 or later
SH370R6 PlusVersion SH370000.105 or later
SH370R8Version SH370200.102 or later
XH310XPC slim (3L)H310Version XH310200.105 or later
XH310VVersion XH310200.105 or later
RS-232 RS-422 RS-485
Bild PIN COM COM COM
1 DCD1# 422 TX - 485 -
2 SIN1 422 TX + 485 +
3 SOUT1 422 RX -
4 DTR1 422 RX +
5 GND
6 DSR1#
7 RTS1
8 CTS1#
9 RI1#

Since the introduction of Intel's 9th generation processor family (Coffee Lake Refresh), some of the new 9th-gen processor models no longer have integrated graphics, namely the “F” models like, for example, the i5-9400F. To operate a system with these processor models, a discrete graphics card is required. These processor models are compatible to Shuttle XPC cube series with a free PCIe-x16 slot only. The Shuttle XPC slim series which uses integrated Intel CPU graphics, won't be able to run those processor models.

This information can also be found on the packaging of an Intel boxed processor:

For reference, please see the full list of Intel's 9th-gen desktop processors here: https://ark.intel.com/products/codename/97787/Coffee-Lake#@desktop

To learn more on which processor is compatible with your Shuttle XPC, please refer to our support list of the relevant XPC model: https://global.shuttle.com/support/supportList

The first COM port is marked on this photo:

In case your DH310 does not boot with an Intel 9xxx CPU installed, please follow the procedure below.

The system does basically support 9xxx processors, however due to different graphics chips, the BIOS needs to be updated to get a picture. The following procedure explains how to “blind flash” the system without an initial monitor signal.

:!: Please note: You WILL NOT have to install a previous-generation processor to perform the update!

BIOS Download: https://global.shuttle.com/products/productsDownload?productId=2261 (choose version DH310000.104 or later)

  • USB Drive preparation:
    1. Format a USB drive in FAT32
    2. Copy the BIOS files to the Root Directory of your USB drive
  • Flash Process
    1. Install the processor and memory in your DH310 (No HDD or other components!).
    2. Apply power, HDMI/DP and a USB keyboard.
    3. Connect the USB Stick you just prepared to any USB port.
    4. Power-on the system.
    5. WAIT for about 2 minutes. The machine will flash in background with no screen prompt. :!: Please DO NOT power-off the system or press any key!
    6. After 2 minutes the following screen should appear.
    7. Remove the USB drive and press F1 to continue.
    8. Finish
  • Last modified: 2023/03/21 13:32
  • by TS