Differences

This shows you the differences between two versions of the page.

--- faq:xpc_slim:dl40n [2026/01/23 13:57] – Shuttle
+++ faq:xpc_slim:dl40n [2026/01/23 14:36] (current) – Shuttle
@@ Line 4: / Line 4: @@
 ==== Which processor is integrated into the Shuttle DL40N? ====
-The DL40N is equipped with the Intel Processor N150 (Alder Lake-N). It features 4 cores, 4 threads, and a burst frequency of up to 3.4 GHz with a very low TDP of only 6 Watts.
+The DL40N is equipped with the Intel Processor N150 (Alder Lake-N / Twin Lake-N). It features 4 cores, 4 threads, and a burst frequency of up to 3.6 GHz with a very low TDP of only 6 Watts.
 ==== Does the system require active cooling? ====
@@ Line 26: / Line 26: @@
 ==== What are the functions of the internal JP2 header? ====
-The JP2 header (4-pin, 2.0 mm pitch) is designed for external system control and integration. The pin assignment is as follows:
+The JP2 header (4-pin, 2.54 mm pitch) is designed for external system control and integration. The pin assignment is as follows:
 ^ Pin ^ Function ^
 | Pin 1 | External Power Button |
-| Pin 2 | External Reset Button |
+| Pin 2 | Clear CMOS function |
 | Pin 3 | Ground (GND) |
 | Pin 4 | +5V DC output (max. 500mA) |
@@ Line 38: / Line 38: @@
   - Power down the system and disconnect the AC power cord.
   - Short Pin 2 and Pin 3 for approximately 5 to 10 seconds.
-  - Remove the short, reconnect the power, and start the system. The BIOS settings will be restored to factory defaults.
+  - Remove the short, reconnect the power, and start the system.
+The BIOS settings will be restored to factory defaults.
 ==== How many displays can be connected? ====
-The system supports up to three independent displays simultaneously via HDMI 2.0b, DisplayPort 1.4, and the analog VGA (D-Sub) port.
+The system supports up to three independent displays simultaneously via HDMI 2.0b, DisplayPort 1.4a, and the analog VGA (D-Sub) port.
 ===== Installation & Features =====
@@ Line 54: / Line 56: @@
 The DL40N is designed for an ambient temperature range of 0 °C to 40 °C. Ensure sufficient airflow, especially when the device is mounted behind a display or in a confined space.
+===== Advanced Networking & Connectivity =====
+==== Does the DL40N support 2.5 Gbps Ethernet? ====
+Yes, both LAN ports are equipped with Intel i226-LM controllers, which support speeds of 10, 100, 1000, and 2500 Mbps (2.5G). This provides significantly higher bandwidth for network-intensive applications compared to standard Gigabit LAN.
+==== Can I use the COM ports for RS422 or RS485 communication? ====
+The left serial port (COM1) is multi-functional. You can switch its mode from standard RS232 to RS422 or RS485 directly within the BIOS setup. The right port (COM2) is limited to RS232 only.
+===== Power & Industrial Integration =====
+==== Can the DL40N be powered by a 12V source? ====
+Yes, the DC input of the DL40N is flexible. It supports external power sources with either 12V (±5%) or 19V (±5%). This makes it highly suitable for automotive applications or integration into existing 12V industrial power grids.
+==== Is there a hardware solution to force the PC to start when power is applied? ====
+Yes. In addition to the BIOS "Restore on AC Power Loss" setting, there is a physical jumper labeled JP1. If you remove this jumper, the system will unconditionally start as soon as power is supplied, which is the most reliable "Always-On" solution for remote installations.
+==== Can I add mobile connectivity (LTE/4G) to the DL40N? ====
+Yes, Shuttle offers an optional LTE kit (WWN03). This kit includes an adapter card, internal cables, and two external antennas. Please note that installing the WWN03 kit occupies the space of the 2.5-inch drive bay, meaning you can only use an M.2 SSD for storage.
+===== Maintenance & Thermal Management =====
+==== Are thermal pads included for the memory and SSD? ====
+Yes, the supplied accessories include two specific thermal pads:
+  * One 50 x 15 x 2.25 mm pad for the DDR5 SO-DIMM module.
+  * One 50 x 20 x 12.0 mm pad for the M.2-2280 SSD.
+It is highly recommended to install these to ensure stable performance in the fanless chassis.
+==== Does the VGA port support Hot-Plugging? ====
+No, the analog VGA (D-Sub) connector does not support the Hot-Plug feature. To ensure the display is correctly detected, the monitor should be connected before the system is powered on.
 ==== Related links ====
 {{backlinks>.}}