BR06S

By default, you can use two relays at the back panel to act as different event triggers.

e.g.:
→ “Login successful”: Welcome → Triggers the relay0 and relay1's setting.
→ “Login failed”: Access Denied → Triggers the relay0 and relay1's setting.

The optional connectors (RS-232/RS-485, DC digital in, Wiegand in/out)
require a custom firmware. For further details, please contact our support.

Please press the reset button on the back panel for a few seconds while the system is running. Note: All data will be deleted!

The maximum number is 3,000 users.

The BR06S is a closed system. It is not possible to access the operating system.
For further details, please contact our support.

No, the hardware does not support any other operating systems.

Yes, in addition to the NFC standard you can also use RFID cards (13.56 MHz).
RFID cards with 125 kHz are not supported.

  • faq/biometric_solutions/br06s.txt
  • Last modified: 2019/06/04 15:11
  • by CS