Differences

This shows you the differences between two versions of the page.

--- faq:xpc_all-in-one:x50v3 [2016/08/29 15:28] – Shuttle
+++ faq:xpc_all-in-one:x50v3 [2017/01/25 13:53] (current) – [X50V3] christian
@@ Line 2: / Line 2: @@
 {{section>faq:xpc_slim:xs35v3#where_can_i_find_drivers_for_other_operating_systems_beside_windows_7_32-bit&firstseconly&nofooter&noeditbutton&noreadmore}}
-===== How to install Memory =====
+===== How to install memory =====
-Because of Intel's Spec. issue, when only use one memory, please plug the memory into upper DIMM slot. Please check below picture:
+Because of Intel's specification issue, when only use one memory module is used, please install the module in the upper DIMM slot. Please see the below picture:
 {{:faq:xpc_all-in-one:x50:x50_memory_population_01.jpg?nolink&500|}}
+===== How do I flash the BIOS Version SX50X300.102 in DOS mode? =====
+  - Please see the below link how to make a bootable USB pen drive first.
+  - Extract and copy all six files in the DOS folder to the root directory.
+  - Reboot and press ''F7'' when you are prompted with the below screen. \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_01.jpg?nolink&400|}}
+  - Select your USB pen drive to boot into DOS mode (Not the SATA and UEFI options) \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_02.jpg?nolink&400|}}
+  - When you see the ''C:\>'' prompt, please run ''FLASH.BAT'' and read the note, then press any key to continue. \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_03.jpg?nolink&400|}}
+  - After first flashing, the system will reboot and when you see the below message, please press ''F1''. \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_04.jpg?nolink&400|}}
+  - After pressing ''F1'', please hit ''F7'' and go to step 4 again.
+  - The system will auto-flash the BIOS again and after this process is finished, the system will shutdown automatically and the BIOS update is completed.
 ==== Related links ====
 {{backlinks>.}}