Because of Intel's Spec. issue, when only use one memory, please plug the memory into upper DIMM slot. Please check below picture:
+
Because of Intel's specification issue, when only use one memory module is used, please install the module in the upper DIMM slot. Please see the below picture:
===== How to flash BIOS Version SX50X300.102 in DOS mode? =====
+
===== How do I flash the BIOS Version SX50X300.102 in DOS mode? =====
-
- Please check below link to make a bootable USB pen drive first.
+
- Please see the below link how to make a bootable USB pen drive first.
-
- Extract and copy all the 6 files in the DOS folder to the root directory.
+
- Extract and copy all six files in the DOS folder to the root directory.
-
- Reboot and press ''F7'' when you see below screen. \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_01.jpg?nolink&400|}}
+
- Reboot and press ''F7'' when you are prompted with the below screen. \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_01.jpg?nolink&400|}}
- Select your USB pen drive to boot into DOS mode (Not the SATA and UEFI options) \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_02.jpg?nolink&400|}}
- Select your USB pen drive to boot into DOS mode (Not the SATA and UEFI options) \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_02.jpg?nolink&400|}}
-
- When you see the ''C:\>'' prompt, please run ''FLASH.BAT'', and read the note, then press any key to continue. \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_03.jpg?nolink&400|}}
+
- When you see the ''C:\>'' prompt, please run ''FLASH.BAT'' and read the note, then press any key to continue. \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_03.jpg?nolink&400|}}
-
- After first flashing, system will reboot, and you will see below message, please press ''F1''. \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_04.jpg?nolink&400|}}
+
- After first flashing, the system will reboot and when you see the below message, please press ''F1''. \\ {{:faq:xpc_all-in-one:x50:x50_dos_bios_04.jpg?nolink&400|}}
-
- After press ''F1'', please press ''F7'' and go step 4 again.
+
- After pressing ''F1'', please hit ''F7'' and go to step 4 again.
-
- System will auto flash BIOS again, and after flashing finish, system will auto shutdown, and BIOS updating is finished.
+
- The system will auto-flash the BIOS again and after this process is finished, the system will shutdown automatically and the BIOS update is completed.