This is an old revision of the document!


You may have missed to remove the transparent protection foil from the cover of the speakers located at the bottom of your All-in-One PC.

  1. Open the eGalaxy touch tool
  2. Into the “Display” page, confirm main screen is X50V5
    Click to check option “Enable Multiple Monitors” and “Map to main display if system has only one display monitor”, and then click “Apply”
  3. Tool will confirm setting and inform need to do touch calibration again, please click “Yes” and “OK”
  4. Please into the “Tools” page and click “4 Points Calibration” to adjust touch screen
  5. After the adjust touch screen, please click “OK”
  6. Finished. After the above adjust, when you disconnect/connect external monitor don't need to setup again.
  • Last modified: 2018/07/16 12:24
  • by TS