This is an old revision of the document!
SB51G
I am unable to update/flash my BIOS, why?
Please check the jumper on JP4 first. If no jumper is set, please add a jumper cap to pin2 and pin3. If a jumper is installed on pin1 and pin2, please remove it and install it on pin2 and pin3.
Why is "CPU Clock" under Frequency/Voltage Control in the CMOS Setup Utility can only go up to 132MHz, not as manual mentioned as 165MHz?
If FSB 100MHz(400MHz) CPU is installed, the CPU Clock range is from 100MHz to 132MHz. If FSB 133MHz(533MHz) CPU is installed, the CPU Clock range is from 133MHz to 165MHz.
How can I run my DDR333 (PC2700) memory module at 333MHz while using Intel CPU with FSB 100 (400) MHz?
According to Intel chipset specification,
- FSB 400 MHz and DDR 200 supported.
- FSB 400/533 MHz and DDR 266 supported.
- FSB 533 MHz and DDR 333 supported.
and standard design guide:
- When using CPU with FSB 100(400) MHz, DDR can only run DDR333(PC2700) at 266MHz.
- When using CPU with FSB 133(533) MHz, DDR333(PC2700) can run both 266MHz and 333MHz.