This is an old revision of the document!
SB51G
I am unable to update/flash my BIOS, why?
Please check the jumper on JP4 first. If no jumper is set, please add a jumper cap to pin2 and pin3. If a jumper is installed on pin1 and pin2, please remove it and install it on pin2 and pin3.
Why does the "CPU Clock" under Frequency/Voltage Control in the CMOS Setup Utility only go up to 132 MHz and not to 165 MHz as mentioned in the manual?
If a 400 MHz CPU with a 100 MHz FSB is installed, the CPU clock ranges from 100 MHz to 132 MHz. If a 533 MHz CPU with an FSB of 133 MHz is installed, the CPU clock ranges from 133 MHz to 165 MHz.
How can I run my DDR333 (PC2700) memory module at 333MHz while using Intel CPU with FSB 100 (400) MHz?
According to Intel chipset specification,
- FSB 400 MHz and DDR 200 supported.
- FSB 400/533 MHz and DDR 266 supported.
- FSB 533 MHz and DDR 333 supported.
and standard design guide:
- When using CPU with FSB 100(400) MHz, DDR can only run DDR333(PC2700) at 266MHz.
- When using CPU with FSB 133(533) MHz, DDR333(PC2700) can run both 266MHz and 333MHz.