This is an old revision of the document!
SB51G
I am unable to update/flash my BIOS, why?
Please check the jumper on JP4 first. If no jumper is set, please add a jumper cap to pin2 and pin3. If a jumper is installed on pin1 and pin2, please remove it and install it on pin2 and pin3.
Why does the "CPU Clock" under Frequency/Voltage Control in the CMOS Setup Utility only go up to 132 MHz and not to 165 MHz as mentioned in the manual?
If a 400 MHz CPU with a 100 MHz FSB is installed, the CPU clock ranges from 100 MHz to 132 MHz. If a 533 MHz CPU with an FSB of 133 MHz is installed, the CPU clock ranges from 133 MHz to 165 MHz.
How can I run my DDR-333 (PC2700) memory module at 333 MHz while using an Intel CPU with an FSB of 100 MHz?
According to Intel's chipset specifications, it is:
- FSB 400 MHz and DDR-200 supported.
- FSB 400/533 MHz and DDR-266 supported.
- FSB 533 MHz and DDR-333 supported.
As standard guidelines:
- When using a CPU with an FSB 100(400) MHz, DDR can only run DDR333 (PC2700) at 266 MHz.
- When using a CPU with and FSB 133(533) MHz, DDR-333 (PC2700) can run at both 266 MHz and 333 MHz.