Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
faq:xpc_cube:sb61g2 [2016/08/26 14:10]
Shuttle created
faq:xpc_cube:sb61g2 [2017/01/27 14:53] (current)
CS [Why is there a delay on the S/PDIF-out signal?]
Line 1: Line 1:
 ====== SB61G2 ====== ====== SB61G2 ======
-===== Why is there a delay on the S/PDIF-out signal ===== +===== Why does the system fail to power up? ===== 
-Issue: When a file is selected ​to play via SPDIF-out, it takes 0.5s before a sound begins playing. Thus the first 0.5s of a song is missed.+or //Why do the front audio ports fail to work?// or //Why do the front panel USB ports fail to work?//
  
-Fix: A beta driver has been developed ​to remove ​this issue. Please download the new audio driver file [[http://​download.shuttle.eu/​Archive_2004/​Drivers/​new/​fb61/​fb61v3/​cd560/​wdm_a357.zip|here]].+At the front of the XPC SB61G2V3 is a flat cable connecting the daughterboard to the motherboard. If this cable is not connected properly, it will result in partial or full failure of the daughterboard. To correct this issue, please open the chassis and check the cable. 
 + 
 +  - Please double-check,​ if the "Flat cable" is properly connected to motherboard and the front audio board. Check that the cable is not concavely inserted into the header. \\ {{:faq:​xpc_cube:​sb61:​sb61_flat_cable_01.jpg?​nolink&​400|}} 
 +  - Make sure the "Flat cable" is fastened by "Lock bar".  
 +  - Wind the "Flat cable" as follows to avoid future issues. ​ \\ {{:​faq:​xpc_cube:​sb61:​sb61_flat_cable_02.jpg?​nolink&​400|}} 
 + 
 +===== How can I check if my DDR memory is performing in dual channel mode? ===== 
 +  - Press the "​Tab"​ key immediately when your screen displays the Intel logo during the boot process. \\ {{:​faq:​xpc_cube:​sb61:​sb61_dual_channel_01.jpg?​nolink&​100|}} 
 +  - Check the message which is now displayed. \\ {{:​faq:​xpc_cube:​sb61:​sb61_dual_channel_02.jpg?​nolink&​400|}} 
 + 
 +<WRAP center round tip 60%> 
 +Note: Please refer to the user's manual page 38. You need to use the same size and type of DIMMs on Channels 0 and 1. 
 +</​WRAP>​ 
 + 
 +===== Why won't the system boot after overclocking the CPU? ===== 
 +When overclocking the CPU's FSB frequency, the memory frequency will also overclock at the same time. When overclocking,​ make sure that you set the memory frequency to a lower level, so that when the FSB frequency is increased, memory frequency still is kept in a stable range. To do this, first unselect ''​Auto''​ of the ''​Memory Frequency For''​ as shown below. Try to set the memory frequency to a lower level (ex. DDR 266 / 333). 
 + 
 +{{:​faq:​xpc_cube:​sb61:​sb61_overclocking.png?​nolink&​500|}} 
 + 
 +===== Why is there a delay on the S/PDIF output signal? ​ ===== 
 +Issue: When a file is selected to be played via SPDIF, it takes 0.5 seconds for it to start playing. Thus the first 0.5 seconds of e.g. a song is missing. 
 + 
 +A beta driver has been released ​to fix this issue. Please download the new audio driver file from: [[http://​download.shuttle.eu/​Archive_2004/​Drivers/​new/​fb61/​fb61v3/​cd560/​wdm_a357.zip|here]].
  
 ==== Related links ==== ==== Related links ====
 {{backlinks>​.}} {{backlinks>​.}}
  • faq/xpc_cube/sb61g2.1472220651.txt.gz
  • Last modified: 2016/08/26 14:10
  • by Shuttle