SB61G2

or Why do the front audio ports fail to work? or Why do the front panel USB ports fail to work?

At the front of the XPC SB61G2V3 is a flat cable connecting the daughterboard to the motherboard. If this cable is not connected properly, it will result in partial or full failure of the daughterboard. To correct this issue, please open the chassis and check the cable.

1. Please double-check, if the “Flat cable” is properly connected to motherboard and the front audio board. Check that the cable is not concavely inserted into the header.
   
2. Make sure the “Flat cable” is fastened by “Lock bar”.
3. Wind the “Flat cable” as follows to avoid future issues.
   

1. Press the “Tab” key immediately when your screen displays the Intel logo at boot.
   
2. Check the message from your monitor.
   

When overclocking the CPU FSB Clock, the memory frequency will also overclock at the same time. When overclocking make sure that you set the memory frequency to lower level, such that increases in FSB keep the memory frequency in a stable range. To do this, first deselect Auto for the Memory Frequency For as shown below. Try to set memory frequency to a lower level (ex. DDR 266 / 333).

Issue: When a file is selected to play via SPDIF-out, it takes 0.5s before a sound begins playing. Thus the first 0.5s of a song is missed.

Fix: A beta driver has been developed to remove this issue. Please download the new audio driver file here.