This is an old revision of the document!


The maximum size of a card that fits in the G-Series is 206 mm (L) x 98 mm (H) x 16 mm (D). But due to the different layout designs of each model and VGA card, we strongly suggest to check our VGA support list for each model or test before purchasing the VGA card.

The Viiv Technology requirements list as following:

  • Process: Pentium D processor
  • Chipset: Intel 945G + ICH7DH
  • LAN Chip: Intel PRO Client LAN
  • Audio require: High Definition Audio
  • Hard drive: SATA interface and support NCQ function
  • Operating system: Microsoft Windows XP Media Center Edition Rollup 2.

If you have install external PCI-E graphic card, please install with MCE version of video driver

First of all, please update the BIOS version to the latest version and Load Optimized Default after BIOS updated.

  1. Go into BIOSIntegrated PeripheralsOnChip IDE Device change SATA Mode to AHCI.
  2. Enable Quick Resume Technology from Power Management Setup.
  3. Before you have start to install MCE, you will need to papre a floppy drive and the 32bit ICH7R RAID disk that come with accessory box. If you do not have this floppy diskette, you may also download it from our website or driver CD. D:\Intel\F6 install\F6flpy32.exe and answer all prompts presented (Assumes your CD ROM Drives label is D.)
  4. Begin Windows MCE installation
  5. Press F6 function key when the RAID setup message screen come up.
  6. Press S key to select AHCI driver
  7. Insert the floppy disk you just made into the floppy drive.
  8. Select the driver for chipset type “82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)”
  9. After the driver has been selected, press Enter to continue installing Windows MCE.
  10. Installing All the drivers from CD driver include Quick Resume driver under Windows MCE.
  11. Installing Viiv driver
  12. After all the drivers installed, please restart the system.
  • Last modified: 2017/01/31 13:04
  • by christian