This is an old revision of the document!


SD36G5

The Viiv Technology requirements are as follows:

  • Process: Pentium D processor
  • Chipset: Intel 945G + ICH7DH
  • LAN Chip: Intel PRO Client LAN
  • Audio: High Definition Audio
  • Hard drive: SATA interface with NCQ support
  • Operating system: Microsoft Windows XP Media Center Edition Rollup 2.

If you have a PCI-E graphics card installed, please be sure to have the relevant video driver for the MCE version installed as well.

First of all, please update the BIOS version to the latest version and Load Optimized Default once the BIOS update is complete.

  1. Enter BIOS, and go to →Integrated PeripheralsOnChip IDE Device. Here, change SATA Mode to AHCI.
  2. Enable Quick Resume Technology in the Power Management Setup.
  3. Before you begin installing MCE, you need a floppy disk drive and to prepare a floppy disk with the 32-bit ICH7R RAID disk driver that comes with the accessory box. You may otherwise download it from our website or take it from the driver CD. Proceed with D:\Intel\F6 install\F6flpy32.exe and answer all prompts presented (Assuming your CD-ROM drives label is D.)
  4. Now begin to install Windows MCE.
  5. Press the F6 function key when the RAID setup message screen comes up.
  6. Press the S key to select the AHCI driver.
  7. Insert the floppy disk you prepared with the driver into the floppy drive.
  8. Select the driver of the relevant chipset type: “82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)”
  9. When the driver is selected, press Enter to continue the Windows MCE installation.
  10. Now please install all the drivers from the driver CD, which also include the Quick Resume driver, for Windows MCE.
  11. Please install the Viiv driver.
  12. When all the drivers are installed, please restart the system.
  • Last modified: 2017/01/31 13:42
  • by CS