Differences

This shows you the differences between two versions of the page.

--- faq:xpc_cube:sb61g2 [2017/01/27 14:43] – [Why does the system fail to power up?] christian
+++ faq:xpc_cube:sb61g2 [2021/09/02 13:38] (current) – TS
@@ Line 1: / Line 1: @@
 ====== SB61G2 ======
+{{section>faq:hardware:graphics#g-series&firstseconly&nofooter&noeditbutton&noreadmore}}
 ===== Why does the system fail to power up? =====
 or //Why do the front audio ports fail to work?// or //Why do the front panel USB ports fail to work?//
@@ Line 9: / Line 10: @@
   - Wind the "Flat cable" as follows to avoid future issues.  \\ {{:faq:xpc_cube:sb61:sb61_flat_cable_02.jpg?nolink&400|}}
-===== How can I check my DDR is performing in dual channel mode? =====
+===== How can I check if my DDR memory is performing in dual channel mode? =====
-  - Press the "Tab" key immediately when your screen displays the Intel logo at boot. \\ {{:faq:xpc_cube:sb61:sb61_dual_channel_01.jpg?nolink&100|}}
+  - Press the "Tab" key immediately when your screen displays the Intel logo during the boot process. \\ {{:faq:xpc_cube:sb61:sb61_dual_channel_01.jpg?nolink&100|}}
-  - Check the message from your monitor. \\ {{:faq:xpc_cube:sb61:sb61_dual_channel_02.jpg?nolink&400|}}
+  - Check the message which is now displayed. \\ {{:faq:xpc_cube:sb61:sb61_dual_channel_02.jpg?nolink&400|}}
 <WRAP center round tip 60%>
-Note: Please refer to the user's manual page 38, you have to use the same size and type DIMMs on Channels 0 and 1.
+Note: Please refer to the user's manual page 38. You need to use the same size and type of DIMMs on Channels 0 and 1.
 </WRAP>
-===== Why won't the system boot after overclocking the CPU Clock? =====
+===== Why won't the system boot after overclocking the CPU? =====
-When overclocking the CPU FSB Clock, the memory frequency will also overclock at the same time. When overclocking make sure that you set the memory frequency to lower level, such that increases in FSB keep the memory frequency in a stable range. To do this, first deselect ''Auto'' for the ''Memory Frequency For'' as shown below. Try to set memory frequency to a lower level (ex. DDR 266 / 333).
+When overclocking the CPU's FSB frequency, the memory frequency will also overclock at the same time. When overclocking, make sure that you set the memory frequency to a lower level, so that when the FSB frequency is increased, memory frequency still is kept in a stable range. To do this, first unselect ''Auto'' of the ''Memory Frequency For'' as shown below. Try to set the memory frequency to a lower level (ex. DDR 266 / 333).
 {{:faq:xpc_cube:sb61:sb61_overclocking.png?nolink&500|}}
-===== Why is there a delay on the S/PDIF-out signal?  =====
+===== Why is there a delay on the S/PDIF output signal?  =====
-Issue: When a file is selected to play via SPDIF-out, it takes 0.5s before a sound begins playing. Thus the first 0.5s of a song is missed.
+Issue: When a file is selected to be played via SPDIF, it takes 0.5 seconds for it to start playing. Thus the first 0.5 seconds of e.g. a song is missing.
-Fix: A beta driver has been developed to remove this issue. Please download the new audio driver file [[http://download.shuttle.eu/Archive_2004/Drivers/new/fb61/fb61v3/cd560/wdm_a357.zip|here]].
+A beta driver has been released to fix this issue. Please download the new audio driver file from: [[https://download.shuttle.eu/Archive_2004/Drivers/new/fb61/fb61v3/cd560/wdm_a357.zip|here]].
 ==== Related links ====
 {{backlinks>.}}