Differences

This shows you the differences between two versions of the page.

--- faq:xpc_cube:sd36g5 [2016/08/26 12:37] – created Shuttle
+++ faq:xpc_cube:sd36g5 [2017/01/31 13:04] – [How to enable Viiv in SD36G5?] christian
@@ Line 1: / Line 1: @@
 ====== SD36G5 ======
 {{section>faq:xpc_cube:sg33g5#post_issuejp4_jumper_setting_for_shuttle_g5_models&firstseconly&nofooter&noeditbutton&noreadmore}}
+===== How do I enable Viiv technology on my SD36G5? =====
+The Viiv Technology requirements list as following:
+  * Process: Pentium D processor
+  * Chipset: Intel 945G + ICH7DH
+  * LAN Chip: Intel PRO Client LAN
+  * Audio require: High Definition Audio
+  * Hard drive: SATA interface and support NCQ function
+  * Operating system: Microsoft Windows XP Media Center Edition Rollup 2.
+If you have install external PCI-E graphic card, please install with MCE version of video driver
+First of all, please update the BIOS version to the latest version and Load Optimized Default after BIOS updated.
+  - Go into BIOS →''Integrated Peripherals''→''OnChip IDE Device'' change ''SATA Mode'' to ''AHCI''. \\ {{:faq:xpc_cube:sd36:sd36_viiv_01.jpg?nolink&400|}}
+  - Enable ''Quick Resume Technology'' from Power Management Setup. \\ {{:faq:xpc_cube:sd36:sd36_viiv_02.jpg?nolink&400|}}
+  - Before you have start to install MCE, you will need to papre a floppy drive and the 32bit ICH7R RAID disk that come with accessory box. If you do not have this floppy diskette, you may also download it from our website or driver CD. ''D:\Intel\F6 install\F6flpy32.exe'' and answer all prompts presented (Assumes your CD ROM Drives label is D.)
+  - Begin Windows MCE installation \\ {{:faq:xpc_cube:sd36:sd36_viiv_03.jpg?nolink&400|}}
+  - Press ''F6'' function key when the RAID setup message screen come up. \\ {{:faq:xpc_cube:sd36:sd36_viiv_04.jpg?nolink&400|}}
+  - Press ''S'' key to select AHCI driver \\ {{:faq:xpc_cube:sd36:sd36_viiv_05.jpg?nolink&400|}}
+  - Insert the floppy disk you just made into the floppy drive. \\ {{:faq:xpc_cube:sd36:sd36_viiv_06.jpg?nolink&400|}}
+  - Select the driver for chipset type "82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)" \\ {{:faq:xpc_cube:sd36:sd36_viiv_07.jpg?nolink&400|}}
+  - After the driver has been selected, press Enter to continue installing Windows MCE.
+  - Installing All the drivers from CD driver include Quick Resume driver under Windows MCE. \\ {{:faq:xpc_cube:sd36:sd36_viiv_08.jpg?nolink&400|}} {{:faq:xpc_cube:sd36:sd36_viiv_09.jpg?nolink&400|}}
+  - Installing Viiv driver \\ {{:faq:xpc_cube:sd36:sd36_viiv_10.jpg?nolink&400|}} {{:faq:xpc_cube:sd36:sd36_viiv_11.jpg?nolink&400|}}
+  - After all the drivers installed, please restart the system.
 ==== Related links ====
 {{backlinks>.}}