This is an old revision of the document!


SG33G5

The maximum resolution for the onboard VGA output is 1680×1050, on all models of the G5 series.


The exclamation mark indicates an HDMI sound device driver has not been installed properly and a manual driver update is required to complete installation.

  1. Therefore, please open the device manager and doubleclick on the device marked with the exclamation mark.
  2. Go to “Driver” and choose “Update Driver
  3. Choose “Install from a list or specific location (Advanced)” and click “Next”.
  4. Insert the driver CD (or download the HDMI sound driver from the SG33G5 driver download page) and choose “Search removable media (floppy, CD-ROM…).”
  5. The system will now start to search and install all the required drivers.

POST issue: JP4 jumper setting for Shuttle G5 models.

  1. Most of the time when your system doesn’t post it’s because the J4 jumper pins are loose and loosing connectivity with the motherboard. This means that when you turn on your computer its not going to show any on the screen (No Post).
  2. What you need to do to fix this issue is to (unplug power cord first) remove the J4 Jumper from the motherboard and insert them upside down.
  3. Try to restart computer again and you should see the BIOS screen now.

The maximum physical memory can be shared to the onboard video output is 384MB.

Yes, the power supply on SG33G5 can be upgraded to 300W power supply item number PC60.

  • Last modified: 2017/02/07 10:40
  • by christian